AS PROMISED, PIC OF OUR NEW SHORT THROW. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Barton Industries · 11-06-2009, 07:57 PM

Alright guys, here's a pic of our new short throw shifter. The ball that is on top is just one i had laying around. Im still waiting to get mine back from anodize. It will come with a 6061 T6 billet aluminum ball, that will be black anodized and then engraved with SS. It will have a 3/8-16 thread so just about any knob can be used, and it also comes with a factory type stick so you can reuse the original knob if desired, or one of our pistol grips. Throw is reduced about 40-50% depending upon knob height placement. Knob height is adjustable! Later after launch, for those that DO like a knob that sits REALLY low, we will be releasing a stub shaft along with other styles that can be changed in minutes. check out the vendor section for more info. ALL shafts will be made from 303 stainless steel and POLISHED.

Better pics coming next week.

www.bartonindustries.com

Barton Industries · 11-07-2009, 11:45 AM

Here's a quick video going thru the gears.

11flat · 11-07-2009, 01:16 PM

IM ON THE LIST!!!!

ckaram · 11-07-2009, 02:16 PM

How about some actual pics of the shifter unit uninstalled?

Thanks

Road_Warrior85 · 11-07-2009, 02:17 PM

so 1 to 2 to 3 to 4 is easy... but then to 5 is not quite so smooth? everything else he just tapped it there, but for 5 it took longer as he had to go up, over and up

Barton Industries · 11-07-2009, 02:50 PM

I will get some more pics of the whole assembly later next week. As far as 5th not being as smooth its the way i was holding the knob for people to see it and going slow to show the motion.

Barton Industries · 11-07-2009, 02:51 PM

Here is some more info http://www.camaro5.com/forums/showthread.php?t=51010

RMGee · 11-07-2009, 05:28 PM

Yeah I noticed that with fifth too it didnt seem like a problem with the way he was holding it

11-06-2009, 07:57 PM	#1
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	AS PROMISED, PIC OF OUR NEW SHORT THROW. Alright guys, here's a pic of our new short throw shifter. The ball that is on top is just one i had laying around. Im still waiting to get mine back from anodize. It will come with a 6061 T6 billet aluminum ball, that will be black anodized and then engraved with SS. It will have a 3/8-16 thread so just about any knob can be used, and it also comes with a factory type stick so you can reuse the original knob if desired, or one of our pistol grips. Throw is reduced about 40-50% depending upon knob height placement. Knob height is adjustable! Later after launch, for those that DO like a knob that sits REALLY low, we will be releasing a stub shaft along with other styles that can be changed in minutes. check out the vendor section for more info. ALL shafts will be made from 303 stainless steel and POLISHED. Better pics coming next week. www.bartonindustries.com

11-07-2009, 02:16 PM	#4
ckaram Drives: 2011 2SS RS, 1968 ragtop Join Date: Apr 2009 Location: Indiana Posts: 1,850	How about some actual pics of the shifter unit uninstalled? Thanks __________________ 1968 Camaro Convertible LS1, T56

11-07-2009, 02:17 PM	#5
Road_Warrior85 Drives: IBM 2SSRS, 12 Jeep Wrangler 4door Join Date: May 2009 Location: Eastern NC/South AL Posts: 780	so 1 to 2 to 3 to 4 is easy... but then to 5 is not quite so smooth? everything else he just tapped it there, but for 5 it took longer as he had to go up, over and up __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LMR Intake concerns, with pic	SGOS252382	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	55	09-03-2009 01:47 PM
Pic Request Black on Black Polished 20's	nickruta	Camaro Photos \| Spyshots \| Video \| Media Gallery	6	08-12-2009 02:10 PM
Wanted! Pic of Black 2SS w/ground effects.	wildhawg 77	Camaro Photos \| Spyshots \| Video \| Media Gallery	17	07-29-2009 11:21 PM
Posting your built Camaro pic	91RS	Camaro Photos \| Spyshots \| Video \| Media Gallery	7	04-16-2009 09:56 AM
I need a good pic of the Camaro with the Sunroof	CamaroEnergy4Life	Camaro Photos \| Spyshots \| Video \| Media Gallery	25	02-12-2009 10:04 PM

11-07-2009, 11:45 AM	#2
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	Here's a quick video going thru the gears.

11-07-2009, 01:16 PM	#3
11flat Drives: 2010 camaro ss/rs m6 Join Date: Oct 2009 Location: moreno valley, ca Posts: 117	IM ON THE LIST!!!!

11-07-2009, 02:50 PM	#6
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	I will get some more pics of the whole assembly later next week. As far as 5th not being as smooth its the way i was holding the knob for people to see it and going slow to show the motion.

11-07-2009, 02:51 PM	#7
Barton Industries Drives: 2010 Camaro SS Join Date: Sep 2009 Location: Cortland NY Posts: 437	Here is some more info http://www.camaro5.com/forums/showthread.php?t=51010

11-07-2009, 05:28 PM	#8
RMGee Clap Clap Drives: 2SS/RS LS3 Join Date: Sep 2009 Location: NC Posts: 326	Yeah I noticed that with fifth too it didnt seem like a problem with the way he was holding it