11-13-2017, 08:57 PM | #1 |
Wheels and calipers painted!
Over the weekend painted wheels and calipers , added black center caps and wheel decals to make them unique, think they turned out pretty nice, used dupli color self etching primer, three coats of dupli gloss black wheel paint. accidentally bonked one with the impact, left no ding or scratch! pretty tough stuff!
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
11-13-2017, 09:16 PM | #2 |
Drives: 2012 camaro 2ss Join Date: Jun 2017
Location: US
Posts: 378
|
Very nice!
Sent from my SM-G930T1 using Tapatalk |
11-13-2017, 09:21 PM | #3 |
|
Nice! Looks good!
|
11-13-2017, 09:21 PM | #4 |
Drives: 2013 Camaro SS Join Date: Oct 2016
Location: Arvada, CO
Posts: 686
|
Those look great, these wheels always look better black than chrome.
|
11-13-2017, 09:44 PM | #5 |
Drives: 2017 Camaro SS Barry_the_Camaro Join Date: Jul 2017
Location: Indianapolis
Posts: 50
|
Looks awesome!!
__________________
2017 Camaro SS A8 Barry_The_Camaro
Pray Performance Built 416, Pray Performance ported stock heads, 2" Stainless Works headers, BTR Trinity Intake CNC and ported by Pray Performance, D1X Procharger with Stage 2 Intercooler and Red Race BV, E85, Twin nozzle Meth Injection, Circle D Convertor, Kel-Trac spec'ed Viking rear shocks, Multiple BMR rear suspension parts, 1-piece DSS driveshaft, Stock Trans, Stock Diff/Axles |
11-13-2017, 11:43 PM | #6 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,620
|
That looks very good. Great job man.
Did you clear coat them too? Just curious, as I am interested in doing this as well.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
11-13-2017, 11:48 PM | #7 |
|
Looks good! The decal is a nice little touch, never seen that before.
|
11-14-2017, 05:31 AM | #8 |
Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017
Location: Havelock, NC
Posts: 1,328
|
A very clean and professional looking job! Like some others, I think the decal adds a little more class to the job!
__________________
|
11-14-2017, 05:38 AM | #9 |
Drives: 2010 SS Join Date: Oct 2016
Location: CS, TX
Posts: 27
|
Looks really good! I just bought a set of stock wheels to paint and put back on my car as it has 22” in t when I got it and I hate them. This looks sharp!
|
11-14-2017, 07:06 AM | #10 |
Drives: 2014 Camaro 2SS RS & Ground effects Join Date: Apr 2014
Location: Lower Desert Cali
Posts: 1,229
|
They look awesome
__________________
Don’t walk in front of me, I may not follow; Don’t walk behind me, I may not lead; Walk beside me, and just be my friend.
MY BUILD LINK: http://www.camaro5.com/forums/showthread.php?t=484260 |
11-14-2017, 07:55 AM | #11 |
Drives: 2011 ss Join Date: Sep 2015
Location: E-TX
Posts: 764
|
Looks fantastic bud. My ocd wouldn't allow the decals as I'd have to try to make sure they were aligned front and back at all times.
|
11-14-2017, 08:22 AM | #12 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Nice work!
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
11-14-2017, 08:28 AM | #13 |
Thanks for the compliments! Actually didn't end up using clearcoat, the paint was gloss black and I did a pretty heavy last coat and left it at that! Didn't want to push my luck, since they looked so good at that point
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
11-14-2017, 08:31 AM | #14 |
Lol I hear ya , sometimes it's like hey why are those upside down
__________________
2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.
|
|
|
|
|
|