02-20-2018, 08:09 PM | #1 |
Drives: 2010 camaro 1ss m6 Join Date: Feb 2018
Location: Bessemer city nc
Posts: 9
|
Daily driver btr stage 4 cam
Is anyone dd. The btr stage 4 cam in 5th gen camaro? Looking for info on this thanks.
|
02-20-2018, 08:36 PM | #2 |
Drives: 2011 ss 2ss auto camaro Join Date: Mar 2015
Location: mary esther florida
Posts: 385
|
I daily drive a Texas speed stage 4 non dod cam
__________________
2011 2ss white Camaro mods are texas speed stage 4 cam 235/239 Texas speed 2inch headers no cats magna flow bullet mufflers gpi rod mod ,circle d 4000-4200 5c stall. 3.91 gears vararm cai power wedge.
|
02-20-2018, 08:58 PM | #3 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
Me too... not in the winter though....
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
02-20-2018, 09:53 PM | #4 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
BTR NA stg 4 or BTR PD blower stg 4 cam? This is the ZL1 section so I assume you're talking about the PD blower cam.
__________________
Bryan 2018 ZL1 M6
|
02-22-2018, 08:54 AM | #5 |
Drives: 2010 camaro 1ss m6 Join Date: Feb 2018
Location: Bessemer city nc
Posts: 9
|
Thanks guys for the info.. I called TSP and they told me that their stage 4 cam wasn't fir dd i had to go with stage 2 but im looking to make 500rwhp and using a water/meth kit in a N/A set up
|
02-22-2018, 10:39 AM | #6 | |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Quote:
I strongly advise with Cams...Do NOT get lope or power crazy and go for a giant one. It sucks to drive them around town (Daily driving would be close to impossible) and the power is going be at 6000+ RPM. A middle of the range cam is always the best setup IMO and there's very rarely need to go small or bigger. |
|
02-22-2018, 10:52 AM | #7 |
Donkey Dick Cam Camaro
Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009
Location: Los Angeles, CA
Posts: 1,998
|
you dont need water/meth for 500 RWPH on a stock bottom stock heads NA LS3 with a cam only.
__________________
Bone Stock |
02-22-2018, 10:11 PM | #8 | |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
Quote:
Exactly what I was thinking. You don't need meth with an NA engine at all!
__________________
Bryan 2018 ZL1 M6
|
|
02-23-2018, 08:34 AM | #9 |
Team 913
Drives: '14 ZL1, '15 Jeep GC, ‘22 Ram 2500 Join Date: Apr 2015
Location: USA, Central CA
Posts: 1,119
|
Cant have a stg 2 cam and have a forum name of Camzilla
Will have to change it to Cammie or some shit |
02-23-2018, 08:46 AM | #10 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
|
02-23-2018, 10:47 AM | #11 |
Donkey Dick Cam Camaro
Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009
Location: Los Angeles, CA
Posts: 1,998
|
hahahahaha!!!!!!!
__________________
Bone Stock |
02-23-2018, 11:00 AM | #12 |
Drives: 2010 1SS Join Date: Aug 2015
Location: Bayville, NJ
Posts: 936
|
Try to find someone locally that has one and see what you think.. I think tuning plays a big part but I can tell you I went with what I would call semi aggressive with a custom grind and it is a challenge to drive at times. Would not want it as a DD. No thanks. It's great for bumping around here and there but on the roads with other people forget about it for me.. LOL. You will benefit way better with a cam that is DD friendly and probably faster for that style of driving. You're not doing 150 in bumper to bumper traffic.
__________________
2010 1SS LS3, Black, 235/250, .621/.615, 114 + 4, Kooks Stepped Headers, 3.91's, Bo White PTB, Flowmaster Mufflers, Cold Air Industries CAI, Apex Scoop & Windshield Washer Relocate, SLP Wheels, Skip Shift Eliminate, Barton Flat Stick, OEM HID/Halos, Dyno Tuned by ECS
|
03-03-2018, 07:14 AM | #13 |
Drives: 2013 ZL1 Join Date: Jan 2017
Location: Fort Myers, FL
Posts: 101
|
I dd My ZL1 with a BTR stage 4 blower cam.
|
03-03-2018, 08:56 AM | #14 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
How is it in the city?
|
|
|
|
|