02-28-2018, 10:16 PM | #1 |
Drives: 2011 Camaro 2SS Join Date: Jan 2017
Location: Las Vegas
Posts: 145
|
New cam build...
So decided to go with another cam... again. Decided to contact Pat G this time around to get a custom spec'd cam that I'll be happy with down the road (plan on doing LSA swap in the next year or so). Currently have the cam being ground by TSP on their 8320 cores. Spec's for the cam are 233/244 .649"/.615" 111+2LSA. Cam looks very similar to the new TSP stage 4 cam with a tad less duration on both intake and exhaust.
Looking to also swap to 3.91 gears, though I am also looking at the possibility of going with a ZL1 differential for strength. Current mods on the car are 1 7/8” Kooks LTH with HFC (though currently looking for the off-road connection pipes), Solo Performance Mach XL Catback, CAI intake, V-max TB, plus a Howards ASA Cam (226/236 .525”/.525” 110LSA). I will also be putting in the CHE trunion kit upgrade. Also having Pat G tune the car, so hopefully this thing will run like a beast!
__________________
2011 Camaro SS - Kooks 1 7/8" LTH - Kooks HFC - Solo Mach XL Catback - CAI Intake - VMAX TB - Howards ASA Cam |
02-28-2018, 10:46 PM | #2 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
did ya ever get her to the track? PatG is the faschizzle...mine was ground by cam motion on a 8620...shhh on the specs lulz....good luck!
btw - since yer goin this far how come you didn't send the heads out for a cnc? because of the future LSA? just wonderin....l8tr
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
02-28-2018, 11:01 PM | #3 |
Drives: 2011 Camaro 2SS Join Date: Jan 2017
Location: Las Vegas
Posts: 145
|
Yea I ran a 13.0 on a 2.0 60ft. Pirellis were pretty bald and didn't help too much... Upgraded to 315 Nitto N555G2s. And I'm thinking about getting gmpp heads when it comes time to do the LSA. Might get them cnc ported, but I need the gear more than the heads right now
__________________
2011 Camaro SS - Kooks 1 7/8" LTH - Kooks HFC - Solo Mach XL Catback - CAI Intake - VMAX TB - Howards ASA Cam |
02-28-2018, 11:31 PM | #4 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
03-01-2018, 05:18 AM | #5 |
Dan
Drives: 2010 Camaro 2SS IOM Join Date: Nov 2013
Location: Georgia, USA not the other one
Posts: 1,044
|
cool - just went with a Pat G cam on a TSP 8620 core to go with my YSi... 10-12lbs...
__________________
Dan
2010 IOM SS YSI-B, Pat G Cam, Ported CTS-V Heads, ARH LTs MBRP 3" exhaust http://www.camaro5.com/forums/showth...&highlight=ysi |
|
|
|
|