Full HID Xenon headlight set 2SS/RS headlights - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ottobody · 11-19-2009, 10:14 AM

Stock HID Xenon Headlights with Halos, left and right side, can be tinted if asked for
MSRP Headlight housing: $830 each
MSRP HID Bulbs: $293
Asking: $1200 full set with tinted marker lights

ottobody · 11-19-2009, 10:17 AM

they are brand new no bugs or anything we bought the car and pulled them directly out and replaced them with completely differetn headlights

Denvercamaro · 11-24-2009, 12:28 PM

Looking for HID for LS model - they say they are interchangable as long as RS or SS has a production date after 8/20/09?

does this fit your description?

and doyou still have the lights?

BFxenon.com · 11-24-2009, 05:50 PM

what are you switching them out?

Chaos Machine · 11-24-2009, 07:37 PM

Quote:

Originally Posted by Denvercamaro

Looking for HID for LS model - they say they are interchangable as long as RS or SS has a production date after 8/20/09?

does this fit your description?

and doyou still have the lights?

who is they? the prospect of being able to retrofit my 1ss with those groovy hids with projectors has me salivating.

Anwro · 11-24-2009, 09:03 PM

am intrested , but are they plug and play ? i have 2ss no - rs

jrpxxii · 11-24-2009, 10:56 PM

If you do not have an RS these are not plug and play. It takes a huge amount of time and money to convert over to HID. You must have complete HID housings with bulbs, Entire new wiring harness all the way to the switch, new switch and a new PCM and BCM as you must have a RS VIN put in the new PCM and BCM to have the correct codes for the HID to work. Just to let anyone know what it takes, I learned the hard way.

Anwro · 11-25-2009, 08:48 AM

ah too bad .. i was about yo buy them , but it seems like to much cutting and ripping .. and which means i might spend more than $1500 +

ottobody · 11-29-2009, 04:12 PM

im not sure if they aree plug and play or not but its the full headlight assemblies with bulbs im sure you can buy a repairable end for the headlight connection and hard wire them in with out all the pcm and bcm wiring bull

BFxenon.com · 11-29-2009, 11:23 PM

do you have any pictures? I would like to see the connections and what all they come with.

runt69421 · 01-03-2010, 09:26 PM

hey i installed the halos on my 2ss without the wiring harness and i did some wiring of myself and i got everything to work right but i dnmt have highbeams, do u know of a code for the bcm

jrpxxii · 01-03-2010, 10:13 PM

how did you wire them to work?

runt69421 · 01-08-2010, 08:00 PM

i wired them threw the marker lights and i changed the light connecters and spiced and wired threw the marker lights, the only prob i have is no high beams but the lows are bright enough

11-19-2009, 10:14 AM	#1
ottobody Account Suspended Drives: 2010 trans am/camaro Join Date: Oct 2009 Location: lincoln, nebraska Posts: 140	Full HID Xenon headlight set 2SS/RS headlights Stock HID Xenon Headlights with Halos, left and right side, can be tinted if asked for MSRP Headlight housing: $830 each MSRP HID Bulbs: $293 Asking: $1200 full set with tinted marker lights

11-24-2009, 09:03 PM	#6
Anwro Red 2SS Drives: Camaros Join Date: Jun 2009 Location: Kuwait Posts: 314	am intrested , but are they plug and play ? i have 2ss no - rs __________________ 2010 Camaro 2ss L99 Red - Kooks+Corsa+VR+Ebiach LowerKit- 2002 Camaro SS LS1 Black - Kooks+SLP+Hurst- 2009 Escalade Pearl White - Corsa -

11-25-2009, 08:48 AM	#8
Anwro Red 2SS Drives: Camaros Join Date: Jun 2009 Location: Kuwait Posts: 314	ah too bad .. i was about yo buy them , but it seems like to much cutting and ripping .. and which means i might spend more than $1500 + __________________ 2010 Camaro 2ss L99 Red - Kooks+Corsa+VR+Ebiach LowerKit- 2002 Camaro SS LS1 Black - Kooks+SLP+Hurst- 2009 Escalade Pearl White - Corsa -

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Armor Lighting Protection and Smoked Taillight Kits Available	HeadlightArmor	Exterior Parts & Accessories	1597	12-31-2019 02:52 PM

11-19-2009, 10:17 AM	#2
ottobody Account Suspended Drives: 2010 trans am/camaro Join Date: Oct 2009 Location: lincoln, nebraska Posts: 140	they are brand new no bugs or anything we bought the car and pulled them directly out and replaced them with completely differetn headlights

11-24-2009, 12:28 PM	#3
Denvercamaro Drives: camaro Join Date: Nov 2009 Location: denver Posts: 1	Looking for HID for LS model - they say they are interchangable as long as RS or SS has a production date after 8/20/09? does this fit your description? and doyou still have the lights?

11-24-2009, 05:50 PM	#4
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	what are you switching them out?

11-24-2009, 10:56 PM	#7
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	If you do not have an RS these are not plug and play. It takes a huge amount of time and money to convert over to HID. You must have complete HID housings with bulbs, Entire new wiring harness all the way to the switch, new switch and a new PCM and BCM as you must have a RS VIN put in the new PCM and BCM to have the correct codes for the HID to work. Just to let anyone know what it takes, I learned the hard way.

11-29-2009, 04:12 PM	#9
ottobody Account Suspended Drives: 2010 trans am/camaro Join Date: Oct 2009 Location: lincoln, nebraska Posts: 140	im not sure if they aree plug and play or not but its the full headlight assemblies with bulbs im sure you can buy a repairable end for the headlight connection and hard wire them in with out all the pcm and bcm wiring bull

11-29-2009, 11:23 PM	#10
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	do you have any pictures? I would like to see the connections and what all they come with.

01-03-2010, 09:26 PM	#11
runt69421 Drives: 2010 chevy black camaro 2ss Join Date: Nov 2009 Location: jacksonville,nc Posts: 9	hey i installed the halos on my 2ss without the wiring harness and i did some wiring of myself and i got everything to work right but i dnmt have highbeams, do u know of a code for the bcm

01-03-2010, 10:13 PM	#12
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	how did you wire them to work?

01-08-2010, 08:00 PM	#13
runt69421 Drives: 2010 chevy black camaro 2ss Join Date: Nov 2009 Location: jacksonville,nc Posts: 9	i wired them threw the marker lights and i changed the light connecters and spiced and wired threw the marker lights, the only prob i have is no high beams but the lows are bright enough