DR2's and wheels - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

anthony martinez · 09-17-2018, 09:36 AM

slightly used rear drag tires and wheels P325/45R18. No shipping pick up only. Victoria, Tx

1911 1LE · 09-17-2018, 12:18 PM

Hey, those look familiar

anthony martinez · 09-17-2018, 01:09 PM

lol yes they do

anthony martinez · 09-17-2018, 02:05 PM

hit and run

1911 1LE · 09-17-2018, 02:38 PM

I just saw it on the other thread. Made me sick. Don't give up on her yet, go find that SOB in that white F150. How are you liking the 3.91's

anthony martinez · 09-17-2018, 03:11 PM

bad ass gear....works nice with my tsp bump stick. they keep the rpm up nicely

1911 1LE · 09-17-2018, 05:04 PM

Glad you like the 3.91's. Did you ever put these wheels and tires on the car?

anthony martinez · 09-17-2018, 06:07 PM

i played one night and the hooked like a dirty hooker

1 MODDED CAMARO · 09-18-2018, 03:01 AM

How much?

anthony martinez · 09-18-2018, 03:28 AM

450

LETHAL2SS · 09-28-2018, 07:23 AM

How many passes/ miles on these?

1911 1LE · 09-28-2018, 07:52 AM

When I sold them to Anthony, they had about 30 miles and zero passes.

anthony martinez · 09-28-2018, 09:08 AM

Thank you for that validation 1911. I since put approx 10 miles on them. The car has not been to the track and it is now going to be in the body shop for a bit.

LETHAL2SS · 10-01-2018, 09:56 AM

they fit with brembos? and how old is the set up? bought some M/T and the DOT ended up being from 2012... not looking for old tires

09-17-2018, 09:36 AM	#1
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	DR2's and wheels slightly used rear drag tires and wheels P325/45R18. No shipping pick up only. Victoria, Tx Attached Images Last edited by anthony martinez; 09-17-2018 at 10:01 AM.

09-17-2018, 12:18 PM	#2
1911 1LE Drives: 2015 SW 2SS 1LE Join Date: Jan 2018 Location: 78155 Posts: 308	Hey, those look familiar __________________ Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires

09-17-2018, 02:05 PM	#4
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	losing interest bc of this hit and run Attached Images

09-17-2018, 02:38 PM	#5
1911 1LE Drives: 2015 SW 2SS 1LE Join Date: Jan 2018 Location: 78155 Posts: 308	I just saw it on the other thread. Made me sick. Don't give up on her yet, go find that SOB in that white F150. How are you liking the 3.91's __________________ Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires

09-17-2018, 05:04 PM	#7
1911 1LE Drives: 2015 SW 2SS 1LE Join Date: Jan 2018 Location: 78155 Posts: 308	Glad you like the 3.91's. Did you ever put these wheels and tires on the car? __________________ Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires

09-17-2018, 01:09 PM	#3
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	lol yes they do

09-17-2018, 03:11 PM	#6
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	bad ass gear....works nice with my tsp bump stick. they keep the rpm up nicely

09-17-2018, 06:07 PM	#8
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	i played one night and the hooked like a dirty hooker

09-18-2018, 03:01 AM	#9
1 MODDED CAMARO Drives: 2013 CAMARO Join Date: May 2017 Location: TEXAS Posts: 144	How much?

09-18-2018, 03:28 AM	#10
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	450

09-28-2018, 07:23 AM	#11
LETHAL2SS Drives: 2011 Camaro 2SS Join Date: May 2016 Location: Houston, TX Posts: 413	How many passes/ miles on these? __________________ 2010 Camaro 2SS-Mods: Nightfury cam, CNC ported LS3 heads, CNC ported TB, Ported Intake, RX Catch Can, MGW Short Throw Shifter, Mantic 9000 Clutch, TSP 1 7/8 headers, catless NPP, BMR trailing arms, MMR Z/28 Reps 20" gloss black. SOLD 2011 Red Jewel Tintcoat 2SS-Mods: Edlebrock E Force S/C w/ 3" pulley swap,Texas Speed roller Boost Cam 227/235, 641"/649", 114 LSA, PRC Ported Heads, Ported TB,ARH 1 7/8 headers, McLeod RST twin disk 1000 hp clutch, ZL1 Fuel Pump, 620whp

09-28-2018, 07:52 AM	#12
1911 1LE Drives: 2015 SW 2SS 1LE Join Date: Jan 2018 Location: 78155 Posts: 308	When I sold them to Anthony, they had about 30 miles and zero passes. __________________ Maggie 2650 @ 18psi/ 75mm 10 rib/ Dual alky nozzles/ Roto-fab/ ARH 2" Lt's/ GT-12 cam/ ZL1 3.23 Conv./MGW/RPS triple carbon clutch/RSG tranny upgrage/Pedders Ex. XA w/ remote cans and a lot of other crap 897/8??@tires

09-28-2018, 09:08 AM	#13
anthony martinez Drives: 2010 camaro 2ss Join Date: May 2013 Location: Tx Posts: 86	Thank you for that validation 1911. I since put approx 10 miles on them. The car has not been to the track and it is now going to be in the body shop for a bit.

10-01-2018, 09:56 AM	#14
LETHAL2SS Drives: 2011 Camaro 2SS Join Date: May 2016 Location: Houston, TX Posts: 413	they fit with brembos? and how old is the set up? bought some M/T and the DOT ended up being from 2012... not looking for old tires __________________ 2010 Camaro 2SS-Mods: Nightfury cam, CNC ported LS3 heads, CNC ported TB, Ported Intake, RX Catch Can, MGW Short Throw Shifter, Mantic 9000 Clutch, TSP 1 7/8 headers, catless NPP, BMR trailing arms, MMR Z/28 Reps 20" gloss black. SOLD 2011 Red Jewel Tintcoat 2SS-Mods: Edlebrock E Force S/C w/ 3" pulley swap,Texas Speed roller Boost Cam 227/235, 641"/649", 114 LSA, PRC Ported Heads, Ported TB,ARH 1 7/8 headers, McLeod RST twin disk 1000 hp clutch, ZL1 Fuel Pump, 620whp