![]() |
|
|
#1 |
![]() |
Coolant Hose Problems
So I just happened to be looking down in the engine bay and notice this radiator hose not attached to anything and a coworker of mine told me it looked like it was plugged by the previous owner. So I looked down in the coolant reservoir and pulled out the tube and it was COMPLETELY dried up as you can see in the pictures. What is going on here? Where does that hose go? I've had to add coolant straight into the radiator cap.
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,155
|
Think it's from you oil cooler/heater.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
|
#3 |
![]() |
|
|
|
|
|
|
|
|
![]() |
|
|