Weird sound and brake pedal bounce on low speed Camaro LT 2013 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

luisquirosr · 07-18-2019, 09:24 PM

Hi people, i am very new and i have this weird issue on my Camaro LT 2013, i have a sound like something metallic is loose on the front of the car and i have a vibration when i used the break, like my brake pedal bounce but only in low speed (Under 50 km/h), on this point all my ligths on the dash are Off, when i go faster than 50 km/h appear the message "Service Stabilitrak", and all my lights on the dash shows on (abs, traction control, check engine), like 3 or 4 differents ligths, on this point the vibration, the sounf of something is loose and the bounce on the brake pedal completely disapear and never shows again, until i turn off the car, when i turn on again the car shows the same exactly scenario on the same way always.

I hope the community can help me, because i go to three different mechanics and no one identify where the problem is.

Thank You All!

LuSINda · 07-19-2019, 10:34 AM

Check your pads, rotors and hubs. The sensors are located in the hub and the noise could be worn pads.

hrpiii · 07-19-2019, 10:47 AM

a loose brake pad will cause this too. Need to inspect the pads/brakes/rotors to see what is going on. Could also be a bad sensor as mentioned.

luisquirosr · 07-19-2019, 05:26 PM

Hi Thank You both, is not the Pads because I've already check and the mechanic tell me is a half of life, I think can be a sensor but I don't know what type of sensor can be :( Because the Service Stabillitrak message is related to a lot type of sensors not only one....

Enviado desde mi SM-C9000 mediante Tapatalk

PepeLePew · 07-19-2019, 08:15 PM

Could be warped rotors

07-18-2019, 09:24 PM	#1
luisquirosr Drives: Camaro RS 2013 Join Date: Jul 2019 Location: Costa Rica Posts: 3	Weird sound and brake pedal bounce on low speed Camaro LT 2013 Hi people, i am very new and i have this weird issue on my Camaro LT 2013, i have a sound like something metallic is loose on the front of the car and i have a vibration when i used the break, like my brake pedal bounce but only in low speed (Under 50 km/h), on this point all my ligths on the dash are Off, when i go faster than 50 km/h appear the message "Service Stabilitrak", and all my lights on the dash shows on (abs, traction control, check engine), like 3 or 4 differents ligths, on this point the vibration, the sounf of something is loose and the bounce on the brake pedal completely disapear and never shows again, until i turn off the car, when i turn on again the car shows the same exactly scenario on the same way always. I hope the community can help me, because i go to three different mechanics and no one identify where the problem is. Thank You All!

07-19-2019, 10:34 AM	#2
LuSINda Drives: 2010 2SS/RS Join Date: Jun 2015 Location: Washington Posts: 94 View My Garage	Check your pads, rotors and hubs. The sensors are located in the hub and the noise could be worn pads. __________________ Lusinda 2010 2SS/RS

07-19-2019, 08:15 PM	#5
PepeLePew Drives: 2010 2SS Coupe; 2011 2LT Vert Join Date: Dec 2018 Location: Prosper, TX Posts: 458	Could be warped rotors __________________ 2010 2SS/RS LS3 - K&N, GM Performance Axle Back, Hurst Shifter, TSP 1 7/8ths long tubes no cats, TSP Stage 2 "Bald Eagle" cam, GM 3.91, 466whp/429tq

07-19-2019, 10:47 AM	#3
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,573	a loose brake pad will cause this too. Need to inspect the pads/brakes/rotors to see what is going on. Could also be a bad sensor as mentioned.

07-19-2019, 05:26 PM	#4
luisquirosr Drives: Camaro RS 2013 Join Date: Jul 2019 Location: Costa Rica Posts: 3	Hi Thank You both, is not the Pads because I've already check and the mechanic tell me is a half of life, I think can be a sensor but I don't know what type of sensor can be :( Because the Service Stabillitrak message is related to a lot type of sensors not only one.... Enviado desde mi SM-C9000 mediante Tapatalk