01-09-2020, 07:55 AM | #1 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
Grille - exhaust
I have a passenger side exhaust manifold 2011 2SS. Both Cat converters, have about 12k miles on them, they are cut a few inches after the cat.
I also have a heritage grille, it is not the GM one it is aftermarket. It is plastic, black and new. But it has one crack. It is not noticeable unless you manipulate the plastic and can be repaired plastic weld or even glued I am sure, there is no pressure in the area of the crack. Local pickup only. PM me and I can text you pictures of everything.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
01-09-2020, 03:17 PM | #2 |
NEcamaro5
|
Can you send a pic of the grill I’m interested.
|
01-10-2020, 09:19 PM | #3 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
I don't have a picture of the whole thing at the moment. I sent you a pm with my number
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
01-10-2020, 09:20 PM | #4 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
https://rover.ebay.com/rover/0/0/0?m...%2F25028901822
This is the grille
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
|
|
|
|