06-14-2020, 06:56 PM | #1 |
Drives: Chevrolet Camaro Join Date: Mar 2020
Location: Virginia
Posts: 138
|
Need Help/Info
So I have a 2012 SLP585 Camaro I was looking to put the OEM ZL 1 boost guage in my console where my trans temp is and was wondering how it hooks up?
Thanks Sent from my moto g(7) power using Tapatalk
__________________
|
06-15-2020, 08:06 AM | #2 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
I'm sure it's a mechanical gauge. So you would just need to run a boost line into the cabin. Might just be easier to run an aftermarket boost gauge on your pillar. You'll never be able to look at that cluster by the shifter while you're in boost anyway.
|
06-15-2020, 11:04 AM | #3 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,377
|
No boost line. It pulls a signal from the CAN. But yeah, nobody's looking down under boost.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // JMS // Elite Ultra CC // BMR MM // BC Forged KL13
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
|
|
|
|