You are browsing camaro5 
 |
|
07-06-2020, 09:45 PM
|
#1 |
 
Drives: 2010 Camaro LT Join Date: Jun 2020
Location: Fort Myers, FL
Posts: 3
|
Fuel line fuel pressure sensor
I have a 2010 camaro LT and have been looking all over the internet for the exact location of the fuel pressure sensor under the hood. Can anyone help out please?
|
|
|
|
07-06-2020, 10:35 PM
|
#2 |
          
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,735
|
IDK about your engine, but I know on the V8's it is on the passenger side of the fuel tank.
Edit: After multiple searches all I could come up with is 'It is located on the fuel feed line forward of the fuel tank'. I found plenty of stuff for the SS and LFX, but not the LLT.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
07-06-2020, 10:48 PM
|
#3 |
|
Drives: 2010 Camaro LT Join Date: Jun 2020
Location: Fort Myers, FL
Posts: 3
|
Yep that was my issue. It looks to have two different sensors and the one for the fuel tank I found but not the other. Thank you for your response
|
|
|
|
|
07-06-2020, 10:50 PM
|
#4 | |
|
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,735
|
I know the other sensor for the LFX is behind the intake, but as I said, it may be in a different location on your LLT.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
07-06-2020, 10:58 PM
|
#5 |
|
Drives: 2010 Camaro LT Join Date: Jun 2020
Location: Fort Myers, FL
Posts: 3
|
Very nice! Thank you for the video. I will look tomorrow
|
|
|
|
|
|
|
|
 |
| Tags |
| 5thgen, v6 camaro 2010 |
|
|
