Air lift suspension question.. simple - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

b4wheeler · 07-15-2020, 02:22 PM

Installed AirLift suspension. 👍

Does anyone that has done this install have pictures of how you routed the stainless whip off of the strut.

Just don’t like how mine fits.

Thanks

CT23 · 01-07-2021, 07:23 PM

What did you end up doing? I don't have any pics at the moment, but this is an issue I'm working on currently.

b4wheeler · 03-19-2021, 12:20 PM

I had to remove the strut, loosen the collar, and rotate the bag a quarter turn to put the hose towards the rear.
I have a lot of practice getting struts out. Only 5 bolts after the wheel is off.

07-15-2020, 02:22 PM	#1
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 632 View My Garage	Air lift suspension question.. simple Installed AirLift suspension. 👍 Does anyone that has done this install have pictures of how you routed the stainless whip off of the strut. Just don’t like how mine fits. Thanks __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, Circle D, 3.91, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.

01-07-2021, 07:23 PM	#2
CT23 Drives: 13' ZL1 M6 Join Date: Jul 2015 Location: Bellingham, WA Posts: 27 View My Garage	What did you end up doing? I don't have any pics at the moment, but this is an issue I'm working on currently. __________________ L.O.D. X1 intake and fuel rails, AGP twin turbo kit with Garret turbos GTX3076r .82ar 57/57,Tial 38mm waste gates, Tial Q 50mm bov, Fore duel fuel pump (twin Walbro 430lph) Fuelab 6 micron inline filter, AUS 1400cc injectors, NGK BR7 spark plugs, GP Tuning stg 2 TT cam, ARP headstuds, BTR valve springs and push rods, Smith Bro's brass trunnion upgrade, Monster LT1-S triple clutch, GFB GForce 3 boost controller, SJM line lock, Lingenfelter LNC-2001 2step, PLX module with Bosch O2 wideband, 800ish whp on 92 @ 14psi, 900ish whp on E60 @ 20psi

03-19-2021, 12:20 PM	#3
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 632 View My Garage	I had to remove the strut, loosen the collar, and rotate the bag a quarter turn to put the hose towards the rear. I have a lot of practice getting struts out. Only 5 bolts after the wheel is off. __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, Circle D, 3.91, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.