New personal best - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GODZL1A · 02-04-2021, 05:16 PM

I was able set a new personal best at the 2021 Cadilliac Attack in Orlando FL the car was flawless all weekend I’m pretty happy to say the least

325/50/15 street R’s

Stock bottom end stock heads have never been off the car Tim King built 6L90 stock converter

4,240 lbs with me in it

Left lane

Mods list:

New Era 4 inch CAI
FI interchiller
PNR 7 gallon tank/EMP 4600
NW 103 mm throttle body
Jokerz ported supercharger
Jokerz ported snout
ARH LT headers 1 7/8
ARH X pipe
ARH mid section
ARH hollow cats
ARH exhaust
LPE 2.55 upper pulley
LPE 10.00 lower pulley
LPE 100mm idler pulley
BTR stage 4 cam, springs, pushrods
Fore triple pump
Fore fuel rails
Gates belt K080700HD
ID 1300 injectors
160 degree thermostat
NGK plugs 3346 BR7EF gap 32
Elite catch can

suspension Mods:

Menscer rear shocks
BMR lower control arms
BMR trailing arms
BMR outer trailing arm bushing
BMR tow rods
BMR upper control arm bushings
BMR diff bushings
BMR extreme rear sway bar

Bigdumogre · 02-04-2021, 05:26 PM

Damn at 4200 lbs too - nice!!!!

xdamxincx · 02-04-2021, 09:31 PM

thats really impressive.. wish i could have made it .. i was there 2 years ago .. .. hopefully next year... the time slip shows it was really close race.. he passed u up top ? its not making much sense . he had 6mph on u at the 660ft and only had 2mph at the 1320....he sprayed to try get passed u ...js ....hmm .. cheated...lol

360zl1 · 02-04-2021, 09:39 PM

Nicely done
💯💯💯
✌✌✌

Annatar · 02-05-2021, 12:54 AM

Quote:

4,240 lbs with me in it

1923.232 kg... damn, that's a lot of weight... way too much weight... that's what's been crushing my knee against the door in curves around Hockenheim and making me lose speed by having to break more, harder and earlier than lighter cars...

Still, 9.649 seconds, that's impressive. Well done.

Bigtime53 · 02-05-2021, 07:24 PM

Very impressive! I wish mine would do that. Thanks for sharing.

2NASSTY · 02-11-2021, 05:36 AM

Congrats Buddy! Car was Flying all weekend. This may be the most well sorted out and quickest bolt-on 5th Gen in the Country. Car looks amazing also.

12oclockshadow · 02-11-2021, 01:57 PM

Impressive to say the least at that race weight. Question what weight savings did you do to the car. Or is all that BMR suspension saving on weight?!

GODZL1A · 02-12-2021, 10:28 PM

Thanks for the kind words guys ��

As far as weight savings go the bmr stuff is heavier the only thing I’ve done to save weight is take off the front and rear crash bars and for this race I take out the rear seat and passenger seat and the welds weigh less then the stock wheels

Triple5even813 · 02-12-2021, 10:34 PM

Quote:

Originally Posted by GODZL1A

Thanks for the kind words guys ��

As far as weight savings go the bmr stuff is heavier the only thing I’ve done to save weight is take off the front and rear crash bars and for this race I take out the rear seat and passenger seat and the welds weigh less then the stock wheels

Man, your car is riding the hell out. That's goals right there! Except I wanna do it in a 6 speed, so basically I need like 500whp more lmao

02-04-2021, 05:16 PM	#1
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	New personal best I was able set a new personal best at the 2021 Cadilliac Attack in Orlando FL the car was flawless all weekend I’m pretty happy to say the least 325/50/15 street R’s Stock bottom end stock heads have never been off the car Tim King built 6L90 stock converter 4,240 lbs with me in it Left lane Mods list: New Era 4 inch CAI FI interchiller PNR 7 gallon tank/EMP 4600 NW 103 mm throttle body Jokerz ported supercharger Jokerz ported snout ARH LT headers 1 7/8 ARH X pipe ARH mid section ARH hollow cats ARH exhaust LPE 2.55 upper pulley LPE 10.00 lower pulley LPE 100mm idler pulley BTR stage 4 cam, springs, pushrods Fore triple pump Fore fuel rails Gates belt K080700HD ID 1300 injectors 160 degree thermostat NGK plugs 3346 BR7EF gap 32 Elite catch can suspension Mods: Menscer rear shocks BMR lower control arms BMR trailing arms BMR outer trailing arm bushing BMR tow rods BMR upper control arm bushings BMR diff bushings BMR extreme rear sway bar Attached Images __________________ Follow me at: https://www.youtube.com/channel/UClr...AZ_gIfsi9KTZXg https://www.facebook.com/godzl1a1102/ https://www.facebook.com/groups/1309765529083249/ https://www.instagram.com/godzl1a1102/?hl=en

02-04-2021, 05:26 PM	#2
Bigdumogre Drives: 2012 Camaro SS Join Date: Dec 2019 Location: New York Posts: 1,440	Damn at 4200 lbs too - nice!!!! __________________ 2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!

02-04-2021, 09:31 PM	#3
xdamxincx Banned Drives: zl1 blk Join Date: Nov 2017 Location: sth fl Posts: 152	thats really impressive.. wish i could have made it .. i was there 2 years ago .. .. hopefully next year... the time slip shows it was really close race.. he passed u up top ? its not making much sense . he had 6mph on u at the 660ft and only had 2mph at the 1320....he sprayed to try get passed u ...js ....hmm .. cheated...lol Last edited by xdamxincx; 02-04-2021 at 10:03 PM.

02-11-2021, 05:36 AM	#7
2NASSTY Drives: 2014 M6 ZL1 Join Date: Jan 2012 Location: Tarpon Springs, Fl Posts: 774	Congrats Buddy! Car was Flying all weekend. This may be the most well sorted out and quickest bolt-on 5th Gen in the Country. Car looks amazing also. Attached Images __________________ 15' Ashen Gray Metallic Z/28 14' Crystal Red Tintcoat ZL1 6M, 9.62 at 150.75 MPH 12' Opulent Blue Metallic CTS-V Sedan, 10.690 at 129.60 MPH - SOLD 06' LeMans Blue Metallic Z06, 11.726 at 127.80 MPH Motor - SOLD. 96' Impala SS LTx, 11.397 at 118.10 MPH Motor, 1st stage 10.526 at 127.46 MPH Last edited by 2NASSTY; 02-12-2021 at 05:12 AM.

02-11-2021, 01:57 PM	#8
12oclockshadow Drives: 2012 ZL1 M6 Join Date: Feb 2019 Location: Conroe, Tx Posts: 221 View My Garage	Impressive to say the least at that race weight. Question what weight savings did you do to the car. Or is all that BMR suspension saving on weight?! __________________ FBO. Cammed. Flex fuel.801whp/741wtq on e85

02-04-2021, 09:39 PM	#4
360zl1 Ls/Grudger Drives: Chevrolet zl1 Join Date: Dec 2020 Location: Staging Lane Posts: 10	Nicely done 💯💯💯 ✌✌✌

02-05-2021, 07:24 PM	#6
Bigtime53 Drives: 2013 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,323	Very impressive! I wish mine would do that. Thanks for sharing.

02-12-2021, 10:28 PM	#9
GODZL1A Drives: 2015 ZL1 Join Date: Jun 2015 Location: florida Posts: 487	Thanks for the kind words guys �� As far as weight savings go the bmr stuff is heavier the only thing I’ve done to save weight is take off the front and rear crash bars and for this race I take out the rear seat and passenger seat and the welds weigh less then the stock wheels __________________ Follow me at: https://www.youtube.com/channel/UClr...AZ_gIfsi9KTZXg https://www.facebook.com/godzl1a1102/ https://www.facebook.com/groups/1309765529083249/ https://www.instagram.com/godzl1a1102/?hl=en