02-04-2021, 07:34 PM | #1 |
Drives: '23 LT1 A10 Join Date: Oct 2015
Location: Austin Texas
Posts: 1,043
|
What to use to monitor transmission temps?
I have tried handheld OBD2 scanner and a bluetooth OBD2 using Torque and OBDLink. None of them show the PID for transmission temp. Suggestions?
|
02-04-2021, 08:41 PM | #2 |
Drives: 2010 2SS/RS LS3 A6 IOM Join Date: May 2013
Location: Arizona
Posts: 1,190
|
My 2SS/RS has a trans temp gauge, maybe you can make the mod
|
02-04-2021, 10:20 PM | #3 |
Drives: '23 LT1 A10 Join Date: Oct 2015
Location: Austin Texas
Posts: 1,043
|
|
02-05-2021, 07:06 AM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
Not sure the factory 4 pack gauges are 100% accurate like the engine oil temp gauge.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-05-2021, 10:22 AM | #5 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
I have apiller mounted Aeroforce dual gauges and 1 of the parameters I have showing is the trans temp, and the 4 gauge cluster trans gauge is off by about 10-20 degrees. So it seems on mine.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
02-05-2021, 12:02 PM | #6 |
Drives: '23 LT1 A10 Join Date: Oct 2015
Location: Austin Texas
Posts: 1,043
|
Happen to have a model number for your gauge?
__________________
24 LT1 M6 Sharkskin Metallic
14 Mazda Mazda3 S Grand Touring (Daily) |
02-05-2021, 03:40 PM | #7 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
Well did some driving around today under different circumstances and paid attention closer to what my trans temp gauges were showing, the console gauge would show 180 straight up, but my Aeroforce would show anywhere between 165-180. The console gauge would move to the right of 180 just barely when the trans temp said 188-190. So quite a bit of temp difference there. When I cruise around at speed for quite a while the console gauge would move to the left of 180, just barely and my Aeroforce would show 145-150.
Here is the model I have in my Camaro. https://www.phastekperformance.com/D...-gauge-cn2.htm
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
02-05-2021, 03:47 PM | #8 | |
Drives: '23 LT1 A10 Join Date: Oct 2015
Location: Austin Texas
Posts: 1,043
|
Quote:
__________________
24 LT1 M6 Sharkskin Metallic
14 Mazda Mazda3 S Grand Touring (Daily) |
|
02-05-2021, 04:55 PM | #9 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
You are welcome sir!! Yea, it just plugs into the OBD port and I got the 2 gauge pillar pod from the guy I got the gauges from, but Phastek has them as well... Yea if someone asks a question about something I can help with, I will do my best to get them the answer they need and some facts to back it up. Good luck, oh and those Aeroforce gauges can show A LOT of parameters, you just need to program in what you want to see by scrolling thru them. I have mine set to show 4 different parameters for each gauge.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
02-05-2021, 10:36 PM | #10 | |
Drives: '23 LT1 A10 Join Date: Oct 2015
Location: Austin Texas
Posts: 1,043
|
Quote:
__________________
24 LT1 M6 Sharkskin Metallic
14 Mazda Mazda3 S Grand Touring (Daily) |
|
|
|
|
|