03-23-2021, 02:25 PM | #1 |
Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Brake Ducts
I can’t find anywhere.
OEM Z28 brake duct kit. GM Part # 23252398 Ive tried all dealerships. Anyone got a source that has them? |
03-23-2021, 08:54 PM | #2 |
Drives: 2015 1le Join Date: Feb 2021
Location: Ohio
Posts: 26
|
Also interested!
|
03-23-2021, 09:15 PM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
You try eBay?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-23-2021, 09:42 PM | #4 |
Drives: 2015 1le Join Date: Feb 2021
Location: Ohio
Posts: 26
|
I have im going to try a friend that owns a body shop. Manufacturers are required to have parts available I believe 10 years after production
|
03-23-2021, 10:01 PM | #5 |
Banned
Drives: Camaro 1LE Join Date: May 2018
Location: USA
Posts: 1,348
|
I believe it to be major components for up to 10 years. If you really look at a parts breakdown on say just the camaro, a lot of parts have been discountinued already.
|
03-23-2021, 10:22 PM | #6 |
Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
Nothing on eBay.
Ive order and paid 7x. All refunded money and said discontinued. So looking everywhere. Id prefer that setup as i saw a set on a car and they looked and fit awesome. |
03-23-2021, 10:29 PM | #7 |
Banned
Drives: Camaro 1LE Join Date: May 2018
Location: USA
Posts: 1,348
|
I have them on my car. Such a clean install that I forget they're there quite often.
|
03-24-2021, 06:31 AM | #8 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
I have a set on my 2010 with 2013 fender liners and it’s a tidy setup for sure even have a set of Gen6 deflectors
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-24-2021, 10:36 AM | #9 |
Been hearing that the factory brake ducts are becoming impossible to find.
When I did the Z06 brake upgrade, I wanted to pick up a set but everywhere I looked was "out of stock". Might have to engineer my own.
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Custom Mishimoto Oil Cooler, BMR Tunnel Brace, Custom Dual Mishimoto Oil Catch Cans, MSD Plug Wires, Mishimoto Radiator and Hoses, Melling High Volume/High Flow Oil Pump, Improved Racing Oil Pan Baffle Kit, Improved Racing Oil Pressure Bypass Delete, Improved Racing Oil Pick-up Tube Clamp. |
|
03-24-2021, 11:21 AM | #10 |
Drives: 2015 1le Join Date: Feb 2021
Location: Ohio
Posts: 26
|
I might try to 3d print each end and use flexible brake ducts between if I can't find a set
|
03-24-2021, 12:24 PM | #11 |
Drives: 2014 Camaro SS 1LE Join Date: Oct 2019
Location: Bakersfield CA
Posts: 196
|
|
03-25-2021, 10:34 AM | #12 | |
Quote:
When I get slow enough, I will try to design up a bolt up system out of aluminum and use the same flexible ducts. We have a $40,000 3D printer as well, but the one guy that knew how to run it left years ago, and my boss doesn't want anyone messing with it because the resin it uses is around $800 a cartridge... So it just sits...
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Custom Mishimoto Oil Cooler, BMR Tunnel Brace, Custom Dual Mishimoto Oil Catch Cans, MSD Plug Wires, Mishimoto Radiator and Hoses, Melling High Volume/High Flow Oil Pump, Improved Racing Oil Pan Baffle Kit, Improved Racing Oil Pressure Bypass Delete, Improved Racing Oil Pick-up Tube Clamp. |
||
03-25-2021, 11:26 AM | #13 |
Drives: 2015 1le Join Date: Feb 2021
Location: Ohio
Posts: 26
|
No luck on finding a set in ohio my friends parts guy looked around for me. I did find intake tubes from Amazon for a mercedes that might work just have to make an adapter from round to the rectangle openings in the inerfenders
|
03-25-2021, 02:19 PM | #14 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
Goto the Z28 section an look for Pat he has a Z28 in the UK maybe can print the inner parts he was selling the outlet part into the fender well to attach a hose to.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|