Almost there - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Avenging Orange · 03-24-2021, 07:07 PM

Like many of us...we get excited when we get to modify our cars in one fashion or another.
For me, it's been a long journey... buying my car new in 2010 and deciding which direction to go this time. Most cars in the past were usually hp related...cam, headers, etc. I knew regardless, headers, cai and a solid dyno tune was a priority. Got those done...and thought....this time I'll do something I never got really to involved with....suspension.
So, coming to the main point. After all these years of painfully laboring over what areas were weakest and what to best replace them with.....what wheels and tires were best for my driving.....etc.
Well, we are finally there with installation the last few bushing of my complete BMR bushing replacement and 3.91 gear set....which should be done by tomorrow. Just in time for spring/summer and hopefully a lot of road trips. These cars handle damn fine straight out of the box, but can't wait to see how my vision turns out. Enjoy your day.

larry_g · 03-24-2021, 07:56 PM

F*ck yeah! Glad you are around to enjoy it!

Sent from my Pixel 5 using Tapatalk

03-24-2021, 07:07 PM	#1
Avenging Orange Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010 Location: Clermont, IN Posts: 3,297	Almost there Like many of us...we get excited when we get to modify our cars in one fashion or another. For me, it's been a long journey... buying my car new in 2010 and deciding which direction to go this time. Most cars in the past were usually hp related...cam, headers, etc. I knew regardless, headers, cai and a solid dyno tune was a priority. Got those done...and thought....this time I'll do something I never got really to involved with....suspension. So, coming to the main point. After all these years of painfully laboring over what areas were weakest and what to best replace them with.....what wheels and tires were best for my driving.....etc. Well, we are finally there with installation the last few bushing of my complete BMR bushing replacement and 3.91 gear set....which should be done by tomorrow. Just in time for spring/summer and hopefully a lot of road trips. These cars handle damn fine straight out of the box, but can't wait to see how my vision turns out. Enjoy your day. __________________ 2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419. Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!! Last edited by Avenging Orange; 03-24-2021 at 09:14 PM.

03-24-2021, 07:56 PM	#2
larry_g Drives: 2014 1SS/1LE Join Date: Nov 2015 Location: Louisville, KY Posts: 826	F*ck yeah! Glad you are around to enjoy it! Sent from my Pixel 5 using Tapatalk __________________ 830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.