Got my pac line converter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010CamaroOutlaw · 01-04-2010, 07:14 PM

Now can someone tell me what wires I connect too? Please dont just post the diagram that is all ready in the sticky I cant make heads or tails of it

SO if someone can just tell me what color wires I solder into that would be great. Also for the amp turn on wire.

bng804 · 01-04-2010, 07:22 PM

Do you have the Boston Acoustics system?

2010CamaroOutlaw · 01-04-2010, 07:30 PM

Quote:

Originally Posted by bng804

Do you have the Boston Acoustics system?

Oh right yes I do.

bng804 · 01-04-2010, 07:38 PM

Wires From PAC-------------Wires Going Into BA Amp

Gray------------------------Dark Blue
Gray w/ Black Stripe---------Tan
White-----------------------Brown w/ White Stripe
White w/ Black Stripe--------Brown

Remote turn on--------------White

Although this is probably a bad time to tell you this, the line converter is completely unnecessary when adding an amp to the BA system. If you simply splice a patch cable into the above wires as they come into the amp you will get a line level signal.

The PAC is redundant - you are converting a signal that is already line level to line level. I know some folks that have used them and it sounds ok, but when I did my install (with a crappy scosche line converter) the volume level and sound quality sucked. I pulled the line converter out of the mix and just spliced direct into the signal to the amp and it sounded 100% better.

Good luck!

01-04-2010, 07:14 PM	#1
2010CamaroOutlaw Drives: CGM 2SS/RS Join Date: Jul 2009 Location: Los Angeles, Ca Posts: 273	Got my pac line converter Now can someone tell me what wires I connect too? Please dont just post the diagram that is all ready in the sticky I cant make heads or tails of it SO if someone can just tell me what color wires I solder into that would be great. Also for the amp turn on wire.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
So My SS is on the line this week Production process question?	mslone	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	3	09-17-2009 02:43 PM
How long does it take for a 2010 Camaro to go down the assembly line?	Menardgang	5th Gen Camaro SS LS LT General Discussions	27	09-10-2009 12:57 AM
Fuel Line Size	JSOC_MQ1	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	08-10-2009 09:50 PM
Looking for pics of Rally Yellow 2SS on assembly line	NewCamaroGuy	Camaro Photos \| Spyshots \| Video \| Media Gallery	7	08-05-2009 12:08 PM
L99 owners please weigh in.	PQ	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	130	07-11-2009 10:18 PM

01-04-2010, 07:22 PM	#2
bng804 Drives: '10 Victory Red 2LT Join Date: Oct 2009 Location: Oklahomaville Posts: 208 View My Garage	Do you have the Boston Acoustics system?

01-04-2010, 07:38 PM	#4
bng804 Drives: '10 Victory Red 2LT Join Date: Oct 2009 Location: Oklahomaville Posts: 208 View My Garage	Wires From PAC-------------Wires Going Into BA Amp Gray------------------------Dark Blue Gray w/ Black Stripe---------Tan White-----------------------Brown w/ White Stripe White w/ Black Stripe--------Brown Remote turn on--------------White Although this is probably a bad time to tell you this, the line converter is completely unnecessary when adding an amp to the BA system. If you simply splice a patch cable into the above wires as they come into the amp you will get a line level signal. The PAC is redundant - you are converting a signal that is already line level to line level. I know some folks that have used them and it sounds ok, but when I did my install (with a crappy scosche line converter) the volume level and sound quality sucked. I pulled the line converter out of the mix and just spliced direct into the signal to the amp and it sounded 100% better. Good luck!