Rear bumper to fender alignment - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KillerBomb24 · 06-28-2021, 02:10 PM

I was taking out my bezels around the taillight and they were being a little stubborn so I used a little bit of force. I heard a small pop when it came out and saw a small gap between my bumper and fender. Its a tiny gap but I know it wasn’t there before. Watched some videos but none of them addressed how to fix that specific spot. Any ideas?

Camaro2ss2010 · 06-28-2021, 08:25 PM

Mine does the same thing. It looks like the clip was broken before I purchased the car. I took the rear bumper cover off to replace my diffuser and every now and then I will have to push it back in. Mine looks like someone used epoxy to hold it together.

KillerBomb24 · 06-28-2021, 08:52 PM

Quote:

Originally Posted by Camaro2ss2010

Mine does the same thing. It looks like the clip was broken before I purchased the car. I took the rear bumper cover off to replace my diffuser and every now and then I will have to push it back in. Mine looks like someone used epoxy to hold it together.

Its such a small gap you cant see it unless you’re at an angle. I could try taking of the bumper off but and try realigning but I will probably break a clip or something. I might just paint in between the gap to cover the black under and hope for the best if I cant figure it out. Damn bezels

06-28-2021, 02:10 PM	#1
KillerBomb24 Drives: 2012 Camaro 1LS Join Date: Apr 2021 Location: Jacksonville, FL Posts: 31	Rear bumper to fender alignment I was taking out my bezels around the taillight and they were being a little stubborn so I used a little bit of force. I heard a small pop when it came out and saw a small gap between my bumper and fender. Its a tiny gap but I know it wasn’t there before. Watched some videos but none of them addressed how to fix that specific spot. Any ideas? Attached Images

06-28-2021, 08:25 PM	#2
Camaro2ss2010 Drives: 2010 Camaro 2SSRS M6 Join Date: Jan 2019 Location: Alabama Posts: 1,281	Mine does the same thing. It looks like the clip was broken before I purchased the car. I took the rear bumper cover off to replace my diffuser and every now and then I will have to push it back in. Mine looks like someone used epoxy to hold it together. __________________ ECS supercharger, Texas speed stage 3 boosted cam, Johnson 2110 race style lifters, ported throttle body, long tube headers, aeromotive fuel pump, fic injectors, ATI super damper, Corsa Extreme exhaust, elite engineering catch can and many other things.