07-13-2021, 12:18 PM | #1 |
MCS Coilovers, z28 suspension, 1LE suspension, Forgestar track wheels
Would obviously prefer local sale, I am in Austin Texas. Will consider shipping to CONUS, at buyer expense.
MCS is SOLD I have a new / unused MCS 2WNR coilover set I purchased from Vorshlag for my 1LE track build that didn't materialize. 2WNR means 2 way adjustable (compression/rebound) shocks, NR means non-remote reservoir. These include Vorshlag camber plates, and Vorshlag rear mounts, and narrow diameter springs to more easily fit wider wheels for track use (especially useful for front fitment) with less poke, wheels poking out cause more drag etc. Paid over $4800 for the set with tax & shipping. Asking $3000 + shipping This is a great deal and a very good suspension for road course / autox use. Pic of invoice shows more details Z28 suspension is SOLD I have a used spring/dssv set from the gen5 Z28. I purchased these from a forum member who used them for 7 track events. I had the shocks dyno tested and they are in good shape (I will dig up the dyno shock results). I never installed or used them. Previous seller indicated a small piece of the strut assembly might be missing, they had to reuse it for their replacement assembly. I'll dig out the details and update as needed. I paid 700, I'll take 500. Steal for the dssv shocks. If intersted, I'll pull these out of storage and take pictures. Looks like dusty springs, dssv shocks and strut assembly 2013 1LE suspension I have the take off 1LE springs/shocks from my car, approximately 35k miles. No issues when pulled, they were working great. Replaced with ridetech coilovers. As most of you know, the springs are exactly the same as the SS. I have read others having knocking sounds from the 1LE shocks - I never noticed this but maybe I'm not as sensitive as others. $250 If there is interest I will pull these out of storage and add pictures. Forgestar CF5 wheels Finally, I have a set of Forgestar wheels that I also ordered from Vorshlag to use for track purposes. I never used them for more than fitment and a 5 mile test drive. These are raw aluminum, so they aren't pretty. Set of RE71 mounted in 305/30R19, 5 miles on them (still some stickers on them) Front specs: 19x11, ET27 (you will need spacers or to run narrow spring coilovers such as the MCS coilovers listed above - the idea is to minimize poke) Rear specs: 19x11, ET50 Spent 1800 on the wheels and whatever the new RE71 cost me. $1400, prefer local *Added badly taken photos of the wheels/tires. As mentioned these are raw aluminum. I hosed them off briefly to get the dust off* Thanks for looking
__________________
468, Mishimoto rad + oil cooler, TSP LTH
MCS 2WNR CTSV/ZL1 front calipers/rotors + G-Loc Forgestar CF-5 19x11 Last edited by bkevind; 09-01-2021 at 10:42 AM. Reason: photo z28 sus |
|
07-23-2021, 02:29 PM | #2 |
Drives: Camaro Vert V6 Join Date: Jun 2020
Location: Lakeside Park KY
Posts: 13
|
Pm sent
|
08-05-2021, 03:55 PM | #3 |
Drives: 2015 2SS/RS 1LE Join Date: Nov 2020
Location: austin tx
Posts: 54
|
Do you think the wheels would fit on stock 1LE stuff?
__________________
SE 1 7/8 tubes and 3 inch X pipe, Vararam DRX, TSP stage 2 cam, Deatschwerks 50 lb injectors, Motion catch can, E85. More to come.
|
09-12-2021, 09:49 PM | #4 |
Hey anything still available looking for 1LE Z/28 stuff. LMK. Thanks
|
|
01-02-2022, 05:03 PM | #5 |
Pm sent about 1le suspension
|
|
02-22-2022, 09:30 AM | #6 |
Drives: 2013 2SS/RS and a 1969 Camaro X11 S Join Date: Jan 2017
Location: Fort Worth, TX
Posts: 29
|
Message sent
|
03-08-2022, 09:30 AM | #7 |
Drives: 2013 2SS/RS and a 1969 Camaro X11 S Join Date: Jan 2017
Location: Fort Worth, TX
Posts: 29
|
Are the wheels still available? I’m in Texas and interested.
|
|
|
|
|