You are browsing camaro5 
 |
|
01-03-2022, 07:26 PM
|
#1 |
 Drives: 1993 z28/2010 2SS Join Date: Aug 2015
Location: Las Vegas/Oshawa
Posts: 115
|
Fuel fitting sealant issue
So I’ve been trying to install a fuel pressure sensor, but I can’t get it to seal properly. I’ve been using permatex high temperature thread sealant. I’ve let it cure but as soon as fuel pressure builds up it just leaks so I’m not sure what else to do/use
|
|
|
|
01-03-2022, 09:29 PM
|
#2 |
    
|
__________________
745RWHP/634RWTQ on 93 @ 10psi
806/676 on E85 @ 10psi Currently @15-16psi....  COTW 9/8/14 |
|
|
|
|
01-03-2022, 09:46 PM
|
#3 |
  Drives: 2011 Camaro SS 6sp Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,905
|
I just use ptfe like above, but not that fancy. Hardware store should have it. Any ptfe paste.
Make sure your thread types are the same. Should both be NPT. Some overseas fittings use other style threads that wont seal well with NPT.
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Edlebrock Pro Flo XT 1158whp 1017wtq. 2010 CTS-V A6 - "Stock" SOLD 630whp 658wtq 2024 F-150 RCSB 5.0 4x4 waiting for tunes... |
|
|
|
|
01-03-2022, 10:20 PM
|
#4 |
|
Drives: 1993 z28/2010 2SS Join Date: Aug 2015
Location: Las Vegas/Oshawa
Posts: 115
|
Ok thanks so much, I’ll have to give that a try
|
|
|
|
|
|
|
|
 |
|
|
