2014+ hood vent placement measurements

[ride_002000]

Hey, does anyone have measurements on where the hood vent sits on the hood? I'm installing one on my 2012 2SS and have been playing with placement but want the rain tray to drain properly. Thanks

[0stones0]

Start here:

Hood Vent

[ride_002000]

Yea I read that but didnt see measurements for how far up the vent should be on the hood.

[Mike J]

The measurements are from the windshield down. See instruction number 4

4. Measure from the windshield side of the hood down 16 -3/8” in a couple of different places and make a mark with a pencil or use painters tape to make a guide line. This is the beginning of the extractor mark. Not the hole mark.

[ride_002000]

Originally Posted by Mike J

The measurements are from the windshield down. See instruction number 4

4. Measure from the windshield side of the hood down 16 -3/8” in a couple of different places and make a mark with a pencil or use painters tape to make a guide line. This is the beginning of the extractor mark. Not the hole mark.

Thanks, I went back and re-read it and totally missed that the first time.