03-01-2022, 06:44 AM | #1 |
pete1le
Drives: 2013 Camaro 2SS RS 1LE Join Date: Aug 2014
Location: West Midlands, United Kingdom
Posts: 449
|
Discontinuation of 1LE axles
It appears that GM have discontinued the part for both the left side and right half shafts for the 2013 SS 1LE:
Part numbers: 22806795 (Left), 22806796 (Right). Can anyone recommend a suitable after-market part or suitable OEM part. Not sure if ZL1 axles would work with the 3.91 final drive ratio of the 1LE. Any help with this would be appreciated.
__________________
|
03-01-2022, 07:41 AM | #2 |
not afraid of the wall
Drives: Camaros Join Date: Apr 2010
Location: Pittsburgh
Posts: 2,148
|
Gearing would have have no effect on the axles. So long as the length and splines are the same, they’ll go in.
__________________
2023 1LE 1SS BCD GCF JF5 MN6 SIA SLN UQT
10/13/22: 1100 Past Camaros: 13 1LE|02 SS|01 Z28|00 SS|91 1LE|91 Z28|89 IROC-Z |
03-01-2022, 09:07 AM | #3 | |
pete1le
Drives: 2013 Camaro 2SS RS 1LE Join Date: Aug 2014
Location: West Midlands, United Kingdom
Posts: 449
|
Quote:
Thank you :-)
__________________
|
|
03-02-2022, 07:40 PM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,088
|
ZL1axles will not fit in a SS/1LE/Z28 Diff.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-04-2022, 09:26 AM | #5 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
I just installed z/28 axles on two 1LEs. If you can find them they work, all is same but the grease and booths are higher temp rated.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
07-04-2022, 09:41 AM | #6 |
pete1le
Drives: 2013 Camaro 2SS RS 1LE Join Date: Aug 2014
Location: West Midlands, United Kingdom
Posts: 449
|
Thank you, I will see if I can find the part numbers for the Z/28 axles. Thank you.
__________________
|
07-04-2022, 11:54 AM | #7 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|