04-03-2022, 11:21 PM | #1 |
Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009
Location: Turd Town, WI
Posts: 1,591
|
Finally a powder coat match to IOM!
After looking on/off over the years, I finally found a vendor with a match! I ordered a pound for a test and to do some small brackets and parts. Match is REALLY good.
My test part is laying on a let-down test card that I used to match my car with wet paint. The test part has not been cleared yet, but the color match is awesome. |
04-04-2022, 03:03 AM | #2 |
It don’t come easy.
|
Looks spot on!
__________________
|
04-04-2022, 06:20 AM | #3 |
Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009
Location: Turd Town, WI
Posts: 1,591
|
If you tried to do an accessory that fits right up to the body, I'm sure you would see a slight variation, similar to the typical mismatch on bumper covers, but the stuff like wheels, calipers, brackets, etc., I think this may be closer than my bumper covers. It is really good.
|
04-09-2022, 08:52 PM | #4 |
Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009
Location: Turd Town, WI
Posts: 1,591
|
Sub grille powdered
Color looks really good.
|
|
|
|
|