10-24-2022, 02:34 PM | #1 |
Drives: 2015 Z28 White #729 Join Date: Jul 2022
Location: Seabrook Texas
Posts: 10
|
Replacement Rotors
I would like to go with steel rotors for daily driving and presurve the Carbons. they have alot of track time and it's starting to show. I can't seem to find the exact sizes 15.5x1.4 & 15.3x1.3. Can anyone point me in the right direction. Thanks in advance!
|
10-24-2022, 03:17 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,089
|
KNS Brakes the iron conversion Giro Disc rotor will cost you about 3k
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
10-25-2022, 04:20 AM | #3 |
Barefoot Dave
Drives: 2015 ZL1, 2014 Z/28 Join Date: Dec 2015
Location: Fairfax VA
Posts: 150
|
This is what you are looking for - you can't go wrong here. You can get them cheaper through a vendor like RDP or KNS or https://letsgofastparts.com/
https://girodisc.com/finder/?pfresul...mic&f_axle=All
__________________
Dave M
|
10-25-2022, 07:55 AM | #4 |
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,386
|
A quick +1 for Ken at KNS. Very knowledgeable and discussed brake info with me on the phone for close to an hour. He talked me OUT of buying overly expensive parts for my C5 Z06. The well coordinated parts I got from him (DBA rotors and Carbotech pads) work fantastic!
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
10-25-2022, 09:03 AM | #5 |
Drives: 2015 Z28 White #729 Join Date: Jul 2022
Location: Seabrook Texas
Posts: 10
|
Thanks all!
|
02-03-2023, 11:37 AM | #6 |
Drives: 2011 2SS/RS + 2015 Z/28 Join Date: Nov 2017
Location: St Louis
Posts: 16
|
Brake pads for Girodisc rear rotors
If you haven't pulled the trigger yet on the Girodisc and pads, I have a set of brand new in the box Hawk DTC-60s specifically for the Girodisc rear rotors.
|
|
|
|
|