Seat warmers inop - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

stickwiggler13 · 12-31-2022, 01:00 PM

:

Hey

good folks. Anyone ever have this issue. This is not the issue of seat heat coming on for a minute then shutting off. In my case, when I push seat heater on/off button no lights come on either side. Looked at the fuse under the hood 35 and it looked fine.
Any recommendations besides heading to the dealer?
Thanks in advance

spyderbuddy · 12-31-2022, 05:53 PM

It's probably the wire in the Seats, They're bad to come apart.
You will have to take the seat out of the car to get the covers off the seats.
You will not have to take the whole seat cover off, but you will need to get to the back rest at the seat bottom.
I fixed mine by added a curl of wire to the where it was broken.

myold88 · 01-05-2023, 08:01 PM

Quote:

Originally Posted by spyderbuddy

It's probably the wire in the Seats, They're bad to come apart.
You will have to take the seat out of the car to get the covers off the seats.
You will not have to take the whole seat cover off, but you will need to get to the back rest at the seat bottom.
I fixed mine by added a curl of wire to the where it was broken.

This ^. Mine broke after 3 or 4 years. Moved to Florida so never had to fix it.

12-31-2022, 01:00 PM	#1
stickwiggler13 Drives: 2012 2SS Convertible Join Date: Dec 2017 Location: Raleigh NC Posts: 103	Seat warmers inop :Hey good folks. Anyone ever have this issue. This is not the issue of seat heat coming on for a minute then shutting off. In my case, when I push seat heater on/off button no lights come on either side. Looked at the fuse under the hood 35 and it looked fine. Any recommendations besides heading to the dealer? Thanks in advance

12-31-2022, 05:53 PM	#2
spyderbuddy Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010 Location: Albany, Ga. Posts: 3,474 View My Garage	It's probably the wire in the Seats, They're bad to come apart. You will have to take the seat out of the car to get the covers off the seats. You will not have to take the whole seat cover off, but you will need to get to the back rest at the seat bottom. I fixed mine by added a curl of wire to the where it was broken.