SLP Exhaust pipe - need help! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SS Power · 01-19-2010, 04:48 AM

Hi Camaro lovers,

I want to change the original exhaust pipe system of my 2010 Camaro SS (Automatic). I want to put a realy loud one on it. I was thinking in a exhaust pipe from SLP - Part Number 30214. I want it to sound like the gray Camaro on the first video.

http://www.slponline.com/view_product.asp?P=30214

If I understand it right I have to add a SLP LM II axle-back exhaust to it. Can I only use the Part number they say - "#31212" or can I also change it for part number - "#31211"?

Part Number 31212 (with mufflers)
http://www.slponline.com/view_product.asp?P=31212

Part number 31211 (no mufflers)
http://www.slponline.com/view_product.asp?P=31211

Thanks for Help!!!

infernoinandout · 01-19-2010, 06:13 AM

If you want load with no mufflers just take it to a local muffler shop and put straight pipes and the tips from the factory setup, hell of a lot faster and cheaper.

GangGreen · 01-19-2010, 10:02 AM

I agree with the above post.

THUMPER20X · 01-19-2010, 11:53 AM

Quote:

Originally Posted by GangGreen

I agree with the above post.

I agree with the above, above.......................

KKreme15 · 01-19-2010, 11:57 AM

Quote:

Originally Posted by SS Power

Hi Camaro lovers,

I want to change the original exhaust pipe system of my 2010 Camaro SS (Automatic). I want to put a realy loud one on it. I was thinking in a exhaust pipe from SLP - Part Number 30214. I want it to sound like the gray Camaro on the first video.

http://www.slponline.com/view_product.asp?P=30214

If I understand it right I have to add a SLP LM II axle-back exhaust to it. Can I only use the Part number they say - "#31212" or can I also change it for part number - "#31211"?

Part Number 31212 (with mufflers)
http://www.slponline.com/view_product.asp?P=31212

Part number 31211 (no mufflers)
http://www.slponline.com/view_product.asp?P=31211

Thanks for Help!!!

yes you can.

brAnd7onX · 01-19-2010, 02:32 PM

If you want it loud then why are you going with Loudmouth II?? Loudmouth I is a lot louder than II. But Loudmouth I is basically a muffler delete so like the above post said, just get straight pipes and weld the tips.

SS Power · 01-19-2010, 02:42 PM

Do I need to weld the Loud Mouth II Pipes too or can I just conect them and screw them on?

brAnd7onX · 01-19-2010, 03:04 PM

Quote:

Originally Posted by SS Power

Do I need to weld the Loud Mouth II Pipes too or can I just conect them and screw them on?

If you buy just the LMII axle back u have to weld it to the existing cat-back but if you get the full system with the headers and x-pipe then its all bolt on i believe.

SS Power · 01-19-2010, 06:35 PM

Perfect! I want to get the full thing - Header Package with the x crossover pipe and add the loud mouth to it. Will there be a big difference in the sound between Loud mouth 2 and loud mouth 1 if I change also the headers and the x pipe?

Thanks for the great help guys!

Dre2216 · 01-19-2010, 06:45 PM

Quote:

Originally Posted by brAnd7onX

If you buy just the LMII axle back u have to weld it to the existing cat-back but if you get the full system with the headers and x-pipe then its all bolt on i believe.

The LMII does not need to be welded on for a stand alone installation. It comes with clamps that attach it to the car and the existing attachment points. If you have access to a lift it is about a 45 min. job.

FEN · 01-19-2010, 07:16 PM

Quote:

Originally Posted by SS Power

Perfect! I want to get the full thing - Header Package with the x crossover pipe and add the loud mouth to it. Will there be a big difference in the sound between Loud mouth 2 and loud mouth 1 if I change also the headers and the x pipe?

Thanks for the great help guys!

If your running LT's and Hi-Flo cats and the complete 3" SLP set up i would go with the LM I which is also 3".....i beleive that the LM II is only available in 2 1/2"

SS Power · 01-19-2010, 07:35 PM

I spoke with my Chevrolet dealer today. He would install it for me. He only had one question about all the sensors that are attached at the exhaust pipe to measure the power flow, ect.. He needs to know if all of the measuring results are the same as by the standard exhaust system or if there are changes. If there are changes the car will show a red light at the dashboard telling me to check the engine because the car will think than that something is wrong. Can someone help me with that point?

tjbusa · 01-19-2010, 08:06 PM

Quote:

Originally Posted by SS Power

Hi Camaro lovers,

I want to change the original exhaust pipe system of my 2010 Camaro SS (Automatic). I want to put a realy loud one on it. I was thinking in a exhaust pipe from SLP - Part Number 30214. I want it to sound like the gray Camaro on the first video.

http://www.slponline.com/view_product.asp?P=30214

If I understand it right I have to add a SLP LM II axle-back exhaust to it. Can I only use the Part number they say - "#31212" or can I also change it for part number - "#31211"?

Part Number 31212 (with mufflers)
http://www.slponline.com/view_product.asp?P=31212

Part number 31211 (no mufflers)
http://www.slponline.com/view_product.asp?P=31211

Thanks for Help!!!

I saw a silver camaro on the first video, the other was yellow
Then there is a gray camaro with a LM II and Header Pkg PN 30214 that looks like this:

petman · 01-19-2010, 10:24 PM

SS Power, from what I have read on here, the O2 sensor light probably will show its code, and I don't know if the Chevy Dealer will Tune UR ECM to accept that, read more in these thread throughout forum and you'll see what folks are doing. most go to a speed shop for a dyno tune, and others get a handheld tuner... JMO

01-19-2010, 04:48 AM	#1
SS Power Drives: Camaro SS in white Join Date: Oct 2009 Location: Mexico Posts: 64	SLP Exhaust pipe - need help! Hi Camaro lovers, I want to change the original exhaust pipe system of my 2010 Camaro SS (Automatic). I want to put a realy loud one on it. I was thinking in a exhaust pipe from SLP - Part Number 30214. I want it to sound like the gray Camaro on the first video. http://www.slponline.com/view_product.asp?P=30214 If I understand it right I have to add a SLP LM II axle-back exhaust to it. Can I only use the Part number they say - "#31212" or can I also change it for part number - "#31211"? Part Number 31212 (with mufflers) http://www.slponline.com/view_product.asp?P=31212 Part number 31211 (no mufflers) http://www.slponline.com/view_product.asp?P=31211 Thanks for Help!!!

01-19-2010, 06:13 AM	#2
infernoinandout Drives: 2010 camaross/rs Join Date: Jan 2009 Location: buffalo Posts: 461	Go local If you want load with no mufflers just take it to a local muffler shop and put straight pipes and the tips from the factory setup, hell of a lot faster and cheaper.

01-19-2010, 10:24 PM	#14
petman Proud IBM Owner Drives: 2010 1SS-RS Join Date: Jul 2009 Location: Fostoria, Ohio Posts: 114 View My Garage	SS Power, from what I have read on here, the O2 sensor light probably will show its code, and I don't know if the Chevy Dealer will Tune UR ECM to accept that, read more in these thread throughout forum and you'll see what folks are doing. most go to a speed shop for a dyno tune, and others get a handheld tuner... JMO __________________ My Baby, 1SS/RS Auto

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SLP Exhaust	BlackRS/SS	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	8	02-27-2010 02:47 PM
SLP LT headers and crossover pipe - $200 off and flat rate $25 shipping @ PFYC.com	Redshift	V8 Bolt-Ons & Tunes	14	02-22-2010 03:34 PM
Anyone in Hampton Roads w/ SLP exhaust?	chevyluv7	USA - Mid-Atlantic	3	01-14-2010 02:29 PM
1 3/4's vs 1 7/8's Headers	brAnd7onX	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	28	01-11-2010 06:43 PM
SLP Loudmouth Exhaust	BlackRS/SS	USA - Northwest / Pacific Northwest	5	11-17-2009 02:04 AM

01-19-2010, 10:02 AM	#3
GangGreen Drives: Victory Red LT RS Born:3/3/09 Join Date: Sep 2009 Location: VEGA$ BABY Posts: 136	I agree with the above post.

01-19-2010, 02:32 PM	#6
brAnd7onX Drives: 2012 1SS IOM Join Date: Oct 2009 Location: Hutto, TX Posts: 1,642	If you want it loud then why are you going with Loudmouth II?? Loudmouth I is a lot louder than II. But Loudmouth I is basically a muffler delete so like the above post said, just get straight pipes and weld the tips.

01-19-2010, 02:42 PM	#7
SS Power Drives: Camaro SS in white Join Date: Oct 2009 Location: Mexico Posts: 64	Do I need to weld the Loud Mouth II Pipes too or can I just conect them and screw them on?

01-19-2010, 06:35 PM	#9
SS Power Drives: Camaro SS in white Join Date: Oct 2009 Location: Mexico Posts: 64	Perfect! I want to get the full thing - Header Package with the x crossover pipe and add the loud mouth to it. Will there be a big difference in the sound between Loud mouth 2 and loud mouth 1 if I change also the headers and the x pipe? Thanks for the great help guys!

01-19-2010, 07:35 PM	#12
SS Power Drives: Camaro SS in white Join Date: Oct 2009 Location: Mexico Posts: 64	I spoke with my Chevrolet dealer today. He would install it for me. He only had one question about all the sensors that are attached at the exhaust pipe to measure the power flow, ect.. He needs to know if all of the measuring results are the same as by the standard exhaust system or if there are changes. If there are changes the car will show a red light at the dashboard telling me to check the engine because the car will think than that something is wrong. Can someone help me with that point?