Unknown Plug - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

EthanODell · 04-12-2023, 12:55 PM

Does anyone know what this plug is or where it goes? It’s on the passenger side near the o2 sensor. I’m having misfires on all cylinders on the passenger side. The o2 sensors are connected and working fine.

larry_g · 04-12-2023, 04:16 PM

Sorry. I have mine on a lift right now and don't see anything similar.

Sent from my Pixel 5 using Tapatalk

JANNETTYRACING · 04-17-2023, 12:42 PM

A/C compressor plug

Impressive how anyone could get it way back there.

EthanODell · 04-19-2023, 05:23 PM

Oh really? Interesting that it’s there. Well I’ll take a look at it and see how it’s supposed to be routed. Thank you so much for the information! That helps me a lot.

joshnmn · 04-19-2023, 10:01 PM

I was thinking purge solenoid.

04-12-2023, 12:55 PM	#1
EthanODell Drives: 2011 Chevrolet Camaro Join Date: Mar 2023 Location: Indianapolis Posts: 3	Unknown Plug Does anyone know what this plug is or where it goes? It’s on the passenger side near the o2 sensor. I’m having misfires on all cylinders on the passenger side. The o2 sensors are connected and working fine. Attached Images

04-12-2023, 04:16 PM	#2
larry_g Drives: 2014 1SS/1LE Join Date: Nov 2015 Location: Louisville, KY Posts: 886	Sorry. I have mine on a lift right now and don't see anything similar. Sent from my Pixel 5 using Tapatalk __________________ 830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.

04-17-2023, 12:42 PM	#3
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,416	A/C compressor plug Impressive how anyone could get it way back there. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

04-19-2023, 05:23 PM	#4
EthanODell Drives: 2011 Chevrolet Camaro Join Date: Mar 2023 Location: Indianapolis Posts: 3	Oh really? Interesting that it’s there. Well I’ll take a look at it and see how it’s supposed to be routed. Thank you so much for the information! That helps me a lot.

04-19-2023, 10:01 PM	#5
joshnmn 2&THEHIT Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018 Location: Garner, NC Posts: 1,103 View My Garage	I was thinking purge solenoid.