ZL1 Bumper (T3) Build Help

[Churhahn]

So i’m wanting to build a ZL1 T3 Bumper and I want it to look like the picture attached. To start, I think i’ll go with this front from Ebay:

https://www.ebay.com/itm/32204874175...mis&media=COPY

The only problem is I know this is obviously not the complete bumper with everything I need. I know there is more to it, i’m just not sure what parts I need to compete te it. If anyone is knowledgeable in this and could assist me with what other parts I need to complete this build, that would be great! I don’t mind to order several different parts if i need to, I just want to make sure I get everything I need. Thanks in advance!

[Mr_Draco]

I posted this in your other thread with everything you need to finish the build.

You will also have to buy the absorber which is another $260 (https://www.ebay.com/itm/403635355406), a wire harness for the lights or the new added lights will not work $118 (https://www.gen5diy.com/collections/...-light-harness), and all the hardware needed to put it all together about $40 for all of it. (GM part numbers WF34474, WF68115, and WF56150).

[Churhahn]

Originally Posted by Mr_Draco

I posted this in your other thread with everything you need to finish the build.

Thanks Draco - I wasn’t sure if there was anything else I needed. to complete it.