Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 05-23-2023, 03:52 PM   #1
Randy V.B.
 
Randy V.B.'s Avatar
 
Drives: 2015 2ss 1le
Join Date: Jul 2019
Location: nova scotia
Posts: 141
Ticking noise

Hello everyone, I have researched and found a million different answers here on my question but I haven't found exactly what I'm looking for.
I am getting a ticking noise that is most prominent around 18 to 1900 RPM. Anything above that seems to be quieter and anything below that seems to be quieter and at an idle is almost nonexistent. I've always heard it some white but it seem to be quite a bit louder today for some reason. Could've been on my imagination, you know how we get like that sometimes lol. My question is has anyone had similar symptoms with the noise with similar upgrades that I have done to mine? I have checked for header leaks and don't see anything leaking.

Car has roughly 28,000 miles on it, about 10,000 miles since upgrade. 1050 injectors, Jannetty racing blower cam, I also did the trunion upgrade along with the push rods at the time of cam install, kooks long tubes Just did a fresh oil change this spring with Amsoil signature series.

Thanks
Randy


Sent from my iPhone using Tapatalk
__________________
2015 camaro 2ss rs 1le. jannetty blower cam,jannetty fuel controler, jannetty tune, 1050 id injectors, Kooks long tube's with zl1 corsa extreme exhaust. lsa conversion 14 lbs boost. roto fab intake. afco intercooler, Mcleod rst. hotchkis lowering springs.z28 rims, copo hood




Randy V.B. is offline   Reply With Quote
Old 05-23-2023, 03:56 PM   #2
Randy V.B.
 
Randy V.B.'s Avatar
 
Drives: 2015 2ss 1le
Join Date: Jul 2019
Location: nova scotia
Posts: 141
Quote:
Originally Posted by Randy V.B. View Post
Hello everyone, I have researched and found a million different answers here on my question but I haven't found exactly what I'm looking for.
I am getting a ticking noise that is most prominent around 18 to 1900 RPM. Anything above that seems to be quieter and anything below that seems to be quieter and at an idle is almost nonexistent. I've always heard it some white but it seem to be quite a bit louder today for some reason. Could've been on my imagination, you know how we get like that sometimes lol. My question is has anyone had similar symptoms with the noise with similar upgrades that I have done to mine? I have checked for header leaks and don't see anything leaking.

Car has roughly 28,000 miles on it, about 10,000 miles since upgrade. 1050 injectors, Jannetty racing blower cam, I also did the trunion upgrade along with the push rods at the time of cam install, kooks long tubes Just did a fresh oil change this spring with Amsoil signature series.

I also should note that I hear the ticking outside the car like echoing of buildings and such when driving by slow. Inside the car you can barely hear it.

Thanks
Randy


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk
__________________
2015 camaro 2ss rs 1le. jannetty blower cam,jannetty fuel controler, jannetty tune, 1050 id injectors, Kooks long tube's with zl1 corsa extreme exhaust. lsa conversion 14 lbs boost. roto fab intake. afco intercooler, Mcleod rst. hotchkis lowering springs.z28 rims, copo hood




Randy V.B. is offline   Reply With Quote
Old 05-23-2023, 11:15 PM   #3
SaReNi
 
Drives: 2012 SS
Join Date: Dec 2021
Location: Florida
Posts: 406
Get a mechanic's stethoscope and start listening to all the things it could be. they are cheap to buy. you'll probably find it. start with the injectors.
__________________
2012 Camaro SS
SaReNi is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.