Edelbrock Ignition Wires and AC Delco Plugs

[11/SS/RS]

2011 2SS L99

Didnt see much about these wires, but, I bought Edelbrock Wires # 22716. Wanted to have red ignition wires and these seemed like a decent set made in USA, so I thought Id give them a try. Fit real well and look nice in my opinion.

Spark plugs seem to be a no brainer with the 41-162 so I put them in also.

Installed them last night after work, could only start the car and idle it for a few minutes, but it seemed just fine. I dont DD it so Ill have to wait until this weekend or maybe later in the week to road test.

Anyone else using these wires in particular? Like I said, not much said on these here on the forum, but I read guys were using them in truck engines. Im guessing it shouldnt matter what engine they go in as long as its an LS based engine.

[1JEWLDSSRS]

Those look cool under the cover. Love the red color. I am running these on my setup.

https://www.summitracing.com/parts/tay-79205?rrec=true

[Pops]

Originally Posted by 11/SS/RS

2011 2SS L99

Didnt see much about these wires, but, I bought Edelbrock Wires # 22716. Wanted to have red ignition wires and these seemed like a decent set made in USA, so I thought Id give them a try. Fit real well and look nice in my opinion.

Spark plugs seem to be a no brainer with the 41-162 so I put them in also.

Installed them last night after work, could only start the car and idle it for a few minutes, but it seemed just fine. I dont DD it so Ill have to wait until this weekend or maybe later in the week to road test.

Anyone else using these wires in particular? Like I said, not much said on these here on the forum, but I read guys were using them in truck engines. Im guessing it shouldnt matter what engine they go in as long as its an LS based engine.

Looks nice good job

[11/SS/RS]

Thanks guys. Hopefully there wont be any issues with my wire choice...

[1JEWLDSSRS]

Originally Posted by 11/SS/RS

Thanks guys. Hopefully there wont be any issues with my wire choice...

Naahh. You should be good sir.. Edelbrock!! They are made the same way my Taylor's are, except that mine are 10mm and yours are 8.5..

[11/SS/RS]

Originally Posted by 1JEWLDSSRS

Naahh. You should be good sir.. Edelbrock!! They are made the same way my Taylor's are, except that mine are 10mm and yours are 8.5..

[AlisoBob]

Why did you not go with the NGK Ruthenium HX High Ignitability Spark Plug ??

[11/SS/RS]

Originally Posted by AlisoBob

Why did you not go with the NGK Ruthenium HX High Ignitability Spark Plug ??

Just went with factory replacement. Im only planning Long Tube headers for the future, and my driving style is mostly weekend cruise ins and the occasional night to dinner with the Mrs. Just out of curiosity, how many miles did it take to get the results of those pictures?