'01 V6 Mods...where to start? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

White_Knuckle_Tight · 01-22-2010, 11:30 PM

OK, so my girlfriend has been looking for a car, and I talked her into getting an 01 V6, we don't even have it yet, and I'm already dying to do stuff to it. Other than changing the factory exhaust, slapping a cold air intake on it, and changing the filters to nice fancy ones, where could I start to get a few cheap-ish power boosts out of it?

Also...are there any functioning body kits available for the 4th gens? I mean a kit that actually has a purpose, not just for looks? I've never been able to find any... The car needs a paint job anyway, so hey, why not right?, lol

Thanks in advance guys...

Looking Good in Red · 01-23-2010, 02:45 AM

http://mods.firebird*******/

Revo1 · 01-23-2010, 04:13 PM

Tighten up the suspension right away. The 3.8s roll like Beethoven

Fotowns Finest · 01-23-2010, 05:31 PM

Lol I'm in the same boat, I don't even have my camaro yet, and all I can think about is mods

White_Knuckle_Tight · 01-23-2010, 09:50 PM

Any advice on "Suspension-How-To's" ? I know enough to be dangerous, but I have zero suspension experience...

TFord · 01-23-2010, 10:16 PM

Shouldn't be too expensive to get done...like red said Firebirdv6 is a great source of informaiton for V6 camaro's. ftpp.net is a great site for parts on the V6. Personally I like to go intake, exhaust (tune), suspension, drivetrain, engine/tranny, tune, body. they've got a nice set of LT headers on ftpp I used on my old V6 at FTPP. Im my opinion magnaflow exhaust sounds the best on the V6 with or with out headers. If you want to run a cat Id recommend magnaflow's or random tech high flow cat.

White_Knuckle_Tight · 01-23-2010, 10:44 PM

OK, sorry, false alarm, lol. The link above ^^^ is INCREDIBLY thorough and helpful...thanks Red

Looking Good in Red · 01-24-2010, 02:22 AM

Quote:

Originally Posted by White_Knuckle_Tight

OK, sorry, false alarm, lol. The link above ^^^ is INCREDIBLY thorough and helpful...thanks Red

Sure thing man. Any time.

fbodyrs96 · 01-24-2010, 02:45 PM

don't forget these www.fullthrottle******* www.v6f-body.com

CreeperRS · 01-30-2010, 01:23 PM

Polyurathane endlinks and sway bar bushings make the car feel and handle better. Worked for me.

01-22-2010, 11:30 PM	#1
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	'01 V6 Mods...where to start? OK, so my girlfriend has been looking for a car, and I talked her into getting an 01 V6, we don't even have it yet, and I'm already dying to do stuff to it. Other than changing the factory exhaust, slapping a cold air intake on it, and changing the filters to nice fancy ones, where could I start to get a few cheap-ish power boosts out of it? Also...are there any functioning body kits available for the 4th gens? I mean a kit that actually has a purpose, not just for looks? I've never been able to find any... The car needs a paint job anyway, so hey, why not right?, lol Thanks in advance guys...

01-23-2010, 02:45 AM	#2
Looking Good in Red Drives: Pewter 2000 T/A Join Date: Jul 2007 Location: Thompson's Station, TN Posts: 168	http://mods.firebird*******/ __________________ 2000 T/A ==> Now http://videos.camaroz28.com/video/88...6e01673aef.htm http://forums.stangnet.com/757458-300hp-camaro-v6.html http://www.fquick.com/red_streak

01-23-2010, 04:13 PM	#3
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Tighten up the suspension right away. The 3.8s roll like Beethoven __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

01-24-2010, 02:45 PM	#9
fbodyrs96 Drives: 1996 Camaro RS convertible Join Date: May 2009 Location: Calhoun GA Posts: 370	don't forget these www.fullthrottle******* www.v6f-body.com __________________ Borla_PRO_XS_Sound_Clip Cammed Open Headers Kris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does anyone have an L99 1SS with Automatic Start?	SamIyam	5th Gen Camaro SS LS LT General Discussions	29	02-25-2010 05:58 PM
V6 Camaro Owners! 2010 V6 Zex Nitrous System now available!	Kris@BMCPerformance	Forced Induction	3	01-23-2010 03:41 PM
Mustangs................	vontivonti	5th Gen Camaro SS LS LT General Discussions	4051	12-21-2009 11:42 PM
SLP releases V6 Exhaust Systems...Order Now!!	ZZcamaro	V6 Bolt-Ons & Tunes	13	08-27-2009 11:51 AM
GTA V6 Owners...Need Help	TJ91	Canada	8	08-23-2009 06:22 PM

01-23-2010, 05:31 PM	#4
Fotowns Finest Harbinger of Doom Drives: "Marolyn" Join Date: Jul 2009 Location: Fotown, OH Posts: 357 View My Garage	Lol I'm in the same boat, I don't even have my camaro yet, and all I can think about is mods

01-23-2010, 09:50 PM	#5
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	Any advice on "Suspension-How-To's" ? I know enough to be dangerous, but I have zero suspension experience...

01-23-2010, 10:16 PM	#6
TFord Camaro Fanatic Drives: 2000 Z28 Join Date: May 2007 Location: Auburn, WA Posts: 1,808 View My Garage	Shouldn't be too expensive to get done...like red said Firebirdv6 is a great source of informaiton for V6 camaro's. ftpp.net is a great site for parts on the V6. Personally I like to go intake, exhaust (tune), suspension, drivetrain, engine/tranny, tune, body. they've got a nice set of LT headers on ftpp I used on my old V6 at FTPP. Im my opinion magnaflow exhaust sounds the best on the V6 with or with out headers. If you want to run a cat Id recommend magnaflow's or random tech high flow cat.

01-23-2010, 10:44 PM	#7
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	OK, sorry, false alarm, lol. The link above ^^^ is INCREDIBLY thorough and helpful...thanks Red

01-30-2010, 01:23 PM	#10
CreeperRS Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009 Location: San Diego Posts: 1,579	Polyurathane endlinks and sway bar bushings make the car feel and handle better. Worked for me.