You are browsing camaro5 
 |
|
05-18-2024, 01:57 PM
|
#1 |
         Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010
Location: Albany, Ga.
Posts: 3,474
|
oil pressure sending unit
Quite strange with the Oil pressure sending unit very easy to replace, but my gauge was showing ether 0 oil pressure or 70+ oil pressure after engine was warmed up (199-203) Engine no damage, but i never got a check engine Light
or Check Gauges anybody else get this strange oil pressure reading? |
|
|
|
05-21-2024, 06:05 PM
|
#2 |
 
Drives: 2011 2SS, 2006 GMC Sierra Join Date: Jul 2019
Location: MA
Posts: 316
|
Scan for codes you will probably find oil pressure sensor circuit codes like a P0522 or P0523, You can disconnect the oil pressure sensor and test the circuits
With the ignition in RUN, test the Gray wire for 5 volts. Test the Black wire for ground. Test the Tan/White wire for less than 4.8 volts. If the circuits test good replace the oil pressure sensor |
|
|
|
|
05-28-2024, 05:27 AM
|
#3 |
|
i would say change sensor
__________________
David Vianu
2010 Synergy Green 1LT |
|
|
|
|
|
|
|
 |
|
|
