Connector/Pin/Wire layout for under main fuse panel. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HeavyD · 01-25-2010, 07:31 PM

I have a little electronic project on the go. I need information on the wiring underneath the main fuse panel under the hood. I was looking at it today and found those 3 10mm bolt heads are for 3 big connector bodies on the underside of the fuse panel so there is no direct access to the wiring to the fuses. I need to tap into the ignition feed the engine ECM which is 5amp fuse #15. I would also like to tap into the horn at fuse #51. If anyone has any wire information or diagrams that would be great!
thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM bulletin on Perceived Paint Mismatch on Door and Quarter Panel Paint Appearance	Tran	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	53	07-17-2013 02:16 PM
GM bulletin on Perceived Paint Mismatch on Door and Quarter Panel Paint Appearance	Tran	5th Gen Camaro SS LS LT General Discussions	114	04-16-2012 04:04 PM
Detroit News panel wants GM to build Camaro concept	Tran	5th Gen Camaro SS LS LT General Discussions	12	03-15-2009 05:38 PM

01-25-2010, 07:31 PM	#1
HeavyD Drives: 1SSRS RY L99 Join Date: Aug 2009 Location: Ontario Posts: 1,323	Connector/Pin/Wire layout for under main fuse panel. I have a little electronic project on the go. I need information on the wiring underneath the main fuse panel under the hood. I was looking at it today and found those 3 10mm bolt heads are for 3 big connector bodies on the underside of the fuse panel so there is no direct access to the wiring to the fuses. I need to tap into the ignition feed the engine ECM which is 5amp fuse #15. I would also like to tap into the horn at fuse #51. If anyone has any wire information or diagrams that would be great! thanks!