![]() |
|
|
#1 |
![]() Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 542
|
Looking for low mile factory Brembo pads that were taken off
All you guys who didn't like the dust of the factory pads and took them off with low miles on them to put on ceramic pads I'd like to buy your pads.
Let me know, thanks guys.
__________________
2015 1SS 1LE, Magnuson 2300 Heartbeat and headers. 550rwhp STD, 535 SAE.
|
|
|
|
|
|
#2 |
![]() |
I will look and see where they are at. I just changed mine a few weeks ago, with about 4500 miles on them. You can have them for the cost of shipping, if I can locate them
__________________
2010 2SS SOLD 10-28-23
2013 ZL1 BOUGHT 10-29-23 With 1950 miles K&N Full CAI 15% tint Borla ATAK Cat Back Exhaust Pedal Commander Headers and Tune |
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,155
|
Try the C7 Forum on Corvette Forum they are for sale all the time. Same Caliper same pad.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
|
#4 |
![]() Drives: ZL1 Join Date: Oct 2012
Location: Talladega
Posts: 651
|
I think I still have some with 63 miles on them looking at my note book, I went with HAWKS for the low brake dust.
|
|
|
|
|
|
#5 |
![]() Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 542
|
Thanks guys, let me know.
__________________
2015 1SS 1LE, Magnuson 2300 Heartbeat and headers. 550rwhp STD, 535 SAE.
|
|
|
|
|
|
#6 |
![]() Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 542
|
Back up top
__________________
2015 1SS 1LE, Magnuson 2300 Heartbeat and headers. 550rwhp STD, 535 SAE.
|
|
|
|
|
|
|
|
![]() |
|
|