2011 V6 auto to v8 manual question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KarmaBeABeach · 11-16-2024, 01:39 AM

I have a 2011 v6 camaro that spun a bearing. I already have a parts car 2010 v8 manual camaro with 41k miles on it and will be doing the swap as to why not just buy one. This car has sentimental value to me and would rather spend more to rebuild and make it better.

My main question is the transmission tunnel since im doing the swap what will i need to do to the floor pan/transmission tunnel to get it to fit since from my understanding this transmission has a bit kore bulk.

I am aware literally everything will need moved over from parts car.

Sorry if this isnt the correct thread

bsn · 11-16-2024, 05:26 AM

No first hand knowledge but I doubt you will have to do anything to the tunnel or floor plan since they are the same Zeta platform.

katmaro · 11-16-2024, 08:07 AM

This might help...I think he has some follow up as well.

11-16-2024, 01:39 AM	#1
KarmaBeABeach Drives: Chevy Camaro Join Date: Dec 2022 Location: United States Posts: 2	2011 V6 auto to v8 manual question I have a 2011 v6 camaro that spun a bearing. I already have a parts car 2010 v8 manual camaro with 41k miles on it and will be doing the swap as to why not just buy one. This car has sentimental value to me and would rather spend more to rebuild and make it better. My main question is the transmission tunnel since im doing the swap what will i need to do to the floor pan/transmission tunnel to get it to fit since from my understanding this transmission has a bit kore bulk. I am aware literally everything will need moved over from parts car. Sorry if this isnt the correct thread

11-16-2024, 05:26 AM	#2
bsn Drives: 2013 ZL1 Join Date: Sep 2021 Location: Virginia Posts: 469	No first hand knowledge but I doubt you will have to do anything to the tunnel or floor plan since they are the same Zeta platform.