You are browsing camaro5 
 |
|
09-29-2025, 04:28 AM
|
#1 |
 Drives: Camaro ss Join Date: Sep 2025
Location: Virginia
Posts: 7
|
CAMARO DOWN AND NEED HELP!!!
I have a 2010 Camaro ss (L99) I recently got a afm/dod delete on it (active fuel management) new battery, new maf,iat,02 sensors also. But the car will start then die almost immediately after and I have abs and stabilitrack light on with traction control light on to. I have a ob2 scanner, even tho it’s not a top of the line one they use in shops. When I plug it in I’m not getting any codes for them though. Was wondering if anyone can help me out or any ideas.
|
|
|
|
09-29-2025, 07:27 AM
|
#2 |
  
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 876
|
First thing I'd look at is the MAF, make sure it's the right one in the correct position and plugged in completely. I would also check any other sensor you touched. There's no pending or permanent codes set?
Sent from my Pixel 8 Pro using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
|
|
|
|
09-29-2025, 08:19 AM
|
#3 |
|
Drives: Camaro ss Join Date: Sep 2025
Location: Virginia
Posts: 7
|
The only permanent codes it has is and the only codes that are popping up also
P0050 02 sensor 1 in bank 2 P0030 02 sensor 1 in bank 1 P0059 02 sensor 1 in bank 2 P0053 02 sensor 1 bank 2 |
|
|
|
|
09-29-2025, 09:15 AM
|
#4 | |
 
Drives: Twin Turbo 5th gen Camaro Join Date: Dec 2023
Location: Brasil
Posts: 83
|
Quote:
Is this happening every single time ? Or randomly ? I used to use OB2 scanner a lot, but lately when I am using, when I stop my car and turn it off, the next start I am getting abs,stabilitrack and traction control light on. Car starts but lights stay on. So I had to turn it off.. Wait few minutes.. and after start it again lights go off. This situation only happens when I use ob2 scanner.
__________________
 |
|
|
|
|
|
09-29-2025, 09:35 AM
|
#5 |
|
Drives: Camaro ss Join Date: Sep 2025
Location: Virginia
Posts: 7
|
No it’s constantly like that
|
|
|
|
|
09-29-2025, 10:40 AM
|
#6 |
|
Tri-County Camaro SWFL
|
How did you do the AFM/DOD delete? Then check the connections for everything you replaced.
__________________
|
|
|
|
|
09-30-2025, 03:45 PM
|
#7 |
 Drives: 69 73 camaro Join Date: Sep 2025
Location: Auburn
Posts: 2
|
Hello I’m new and haven’t figured my way around .
I’m trying to find the wiring diagram for 5th gen console with gauges ? Help Probably need to start my own didn’t mean to hijack sorry as it doesn’t show where to post yet ? Last edited by Gen2Dave; 09-30-2025 at 07:12 PM. |
|
|
|
|
|
|
|
 |
| Tags |
| diagnostic, hellllp, l99 engine, stall at startup, technical issues |
|
|
