2010 SS Getting ZL1 Gen 5 Calipers Help - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dkelly990 · 10-28-2025, 02:54 PM

Ok my wife has a 2010 Camaro ZL575 that came with the upgraded SLP Brembo kit but they are still 4 pots. We track and autocross the car so im upgrading to bigger brakes. I have purchased 5th gen ZL1 calipers and rotors. Before I start this swap, I just want to make sure that ordering gen 5 ZL1 Brake lines is all I need? The rears are the same as the ZL1 so im just doing stainless lines all the way around. Any advice or something im missing?

olblue75 · 10-28-2025, 09:09 PM

The dust shields are different you cut your originals or order the actual ZL1 look in the 1LE forum there’s a ton of info there.

dkelly990 · 10-29-2025, 03:44 PM

You da man. Ok Ill check that out. Thank you very much.

CamaroCracka · 10-30-2025, 08:06 PM

Good luck finding those dust shields. You will likely have to just do without them.

dkelly990 · 11-05-2025, 03:48 PM

Quote:

Originally Posted by CamaroCracka

Good luck finding those dust shields. You will likely have to just do without them.

Yeah that has been the outcome so far. I cant find anything and the sad thing is, the car I bought those calipers from had the dust shields but at that time I didnt know I needed them and they were 4 hrs away...

10-28-2025, 02:54 PM	#1
dkelly990 Drives: 2010 Camaro SLP ZL575 Join Date: Oct 2025 Location: Anderson, SC Posts: 10	2010 SS Getting ZL1 Gen 5 Calipers Help Ok my wife has a 2010 Camaro ZL575 that came with the upgraded SLP Brembo kit but they are still 4 pots. We track and autocross the car so im upgrading to bigger brakes. I have purchased 5th gen ZL1 calipers and rotors. Before I start this swap, I just want to make sure that ordering gen 5 ZL1 Brake lines is all I need? The rears are the same as the ZL1 so im just doing stainless lines all the way around. Any advice or something im missing?

10-28-2025, 09:09 PM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	The dust shields are different you cut your originals or order the actual ZL1 look in the 1LE forum there’s a ton of info there. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

10-30-2025, 08:06 PM	#4
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 3,041	Good luck finding those dust shields. You will likely have to just do without them. __________________ 2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes.

10-29-2025, 03:44 PM	#3
dkelly990 Drives: 2010 Camaro SLP ZL575 Join Date: Oct 2025 Location: Anderson, SC Posts: 10	You da man. Ok Ill check that out. Thank you very much.