Gen 5 ZL1 with Factory Stripe on Decklid/ Trunk? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Little Walter · 01-01-2026, 08:19 PM

Hello, if any of you have a ZL1 with the factory OEM stripe on the trunk/ decklid, would you please measure the width of the stripe for me, also is the width the same over the length of the trunk it covers. I had to have my trunk painted and did not measure the stripe prior to removing it. Your help would greatly be appreciated. Thanks in advance.

HawkeyeZL1 · 01-02-2026, 07:33 AM

Measured with a tape measure it's 19.75 inches at the top/back glass end and 19 inches at the spoiler.

Little Walter · 01-03-2026, 12:32 AM

Thanks so much for measuring this for me, greatly appreciated.

01-01-2026, 08:19 PM	#1
Little Walter Drives: ZL1 Join Date: Dec 2016 Location: New Orleans Posts: 263	Gen 5 ZL1 with Factory Stripe on Decklid/ Trunk? Hello, if any of you have a ZL1 with the factory OEM stripe on the trunk/ decklid, would you please measure the width of the stripe for me, also is the width the same over the length of the trunk it covers. I had to have my trunk painted and did not measure the stripe prior to removing it. Your help would greatly be appreciated. Thanks in advance.

01-02-2026, 07:33 AM	#2
HawkeyeZL1 Drives: 2012 ZL1 #1156, 2003 Silverado SS Join Date: Feb 2018 Location: Cedar Rapids, Ia Posts: 161	Measured with a tape measure it's 19.75 inches at the top/back glass end and 19 inches at the spoiler. __________________ 2012 ZL1 #1156, born 5/8/2012. Rotofab cold air intake, Elite Engineering catch can, Texas Speed Long tube headers with off road connections and of course a tune by DynoSteve.

01-03-2026, 12:32 AM	#3
Little Walter Drives: ZL1 Join Date: Dec 2016 Location: New Orleans Posts: 263	Thanks so much for measuring this for me, greatly appreciated.