You are browsing camaro5 
 |
|
04-03-2026, 03:06 PM
|
#1 |
 Drives: 2012 SS Join Date: Feb 2016
Location: Lubbock Texas
Posts: 143
|
Caliper bolts
Quick question, are brake caliper bolts on SS one time use only? Thanks
__________________
2012 2SS/RS 6speed, Howards asa cam on 113lsa Stainless works LT's, NPP exhaust, Z28 Cai, 3.91 gears. Tuned by Blue Thunder 2 racing Lubbock Texas.
|
|
|
|
04-03-2026, 05:23 PM
|
#2 |
|
It don’t come easy.
|
There are TTY (torque to yield) and they are considered one time bolts but, there are those who will reuse them.
__________________
 |
|
|
|
|
04-03-2026, 05:26 PM
|
#3 |
 Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2015
Location: Michigan
Posts: 96
|
Yes they are
133 lb-ft of torque |
|
|
|
|
04-03-2026, 05:36 PM
|
#4 |
|
Tri-County Camaro SWFL
|
As stated they are a TTY bolt. Theyre torqued to a value which and then plus a degree. I think its 30ft/lbs plus 90 degrees. The bolt stretches so its designed to be a one time use. Theres many many people who reuse them without any issues.
New bolts also have a dry locktite on them
__________________
|
|
|
|
|
04-04-2026, 06:15 AM
|
#5 |
|
Drives: 2012 SS Join Date: Feb 2016
Location: Lubbock Texas
Posts: 143
|
Thanks!
__________________
2012 2SS/RS 6speed, Howards asa cam on 113lsa Stainless works LT's, NPP exhaust, Z28 Cai, 3.91 gears. Tuned by Blue Thunder 2 racing Lubbock Texas.
|
|
|
|
|
04-04-2026, 08:50 AM
|
#6 |
         
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,065
|
After several uses, they get more difficult to remove and install. Screaming Chicken has non-TTY bolts if you are looking to replace them. I have done a lot of brake work and only recently replaced the factory bolts with Screaming Chicken units. The vert still has factory bolts.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. |
|
|
|
|
04-04-2026, 08:58 PM
|
#7 |
Drives: 2012 camaro ss Join Date: Sep 2018
Location: Illinois
Posts: 563
|
I reused mine with a little loctite ,no issues at all!
__________________
GPI Powered
 |
|
|
|
|
04-05-2026, 03:30 PM
|
#8 |
   
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 14,555
|
Same here, reused mine..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
 |
|
|
|
|
|
|
|
 |
|
|
