Door Sill Plates - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HopeRidesAlone · 03-28-2010, 08:06 PM

I have a 2LT and want those plates on it i know only the 2ss come with it and i found where i can buy them is there anything i need to know about installing them?

skuttduck · 03-28-2010, 08:41 PM

Quote:

Originally Posted by HopeRidesAlone

I have a 2LT and want those plates on it i know only the 2ss come with it and i found where i can buy them is there anything i need to know about installing them?

Clean the surface really good before applying. I used a rag with rubbing alcohol.

HopeRidesAlone · 03-28-2010, 08:45 PM

Thank you one more question
i take it the sills come with a adhesive on the back on them?

skuttduck · 03-28-2010, 08:47 PM

Quote:

Originally Posted by HopeRidesAlone

Thank you one more question
i take it the sills come with a adhesive on the back on them?

I bought the transformers ones, and they were just a peal and stick.

HopeRidesAlone · 03-28-2010, 09:00 PM

Alright ill Try it out that you for the quick help

skuttduck · 03-28-2010, 09:13 PM

Not a problem.

They are worth it. I got some deep gouge on my passenger door sill somehow. No idea how. The sill plate would have helped that.

Ivan @ Southwest Speed · 03-28-2010, 09:24 PM

Quote:

Originally Posted by skuttduck

I bought the transformers ones, and they were just a peal and stick.

Where you score yours from and what you get em for??
-Ivan

skuttduck · 03-29-2010, 12:14 PM

Quote:

Originally Posted by Bad Karma

Where you score yours from and what you get em for??
-Ivan

I got them from GM parts direct. Kind of wish I would have known about BeckyD@rodgerschevrolet before that. She hooked me up on some parts that were cheaper or real close to GMparts direct price.

I think they are $45 a piece, but I ordered my ambient lighting lamps too.

Ivan @ Southwest Speed · 03-29-2010, 11:29 PM

Quote:

Originally Posted by skuttduck

I got them from GM parts direct. Kind of wish I would have known about BeckyD@rodgerschevrolet before that. She hooked me up on some parts that were cheaper or real close to GMparts direct price.

I think they are $45 a piece, but I ordered my ambient lighting lamps too.

Wooooooo

Proud of them doggies aren't they!! lol I like my Chevrolet ones, but wouldn't mind something to mix it up. I reckon I'll wait for some more to pop up. Car is still new, there's bound to be something else come up.

Ambient lights under the weatherstrip is gonna look awesome.

Can't wait to see AAC's kit.

Thanks,
Ivan

5THGENRS · 04-04-2010, 08:45 PM

they are $76 at chevypartsplus. I want these after i got scratches in the area that these would be applied at, must be from climbing in

i dont think it was me bc i sit down and swing my legs in and if i hit anything its the black plastic just on the inside that holds the carpet in place.

I dont think i would want them after hearing is just adhesive that holds them on. i dont want to drill of course but wont that trap dust dirt, even if you prep the area good, and if you ever take them off

good luck trying to fix the paint fade

skuttduck · 04-04-2010, 08:54 PM

Quote:

Originally Posted by 5THGENRS

they are $76 at chevypartsplus. I want these after i got scratches in the area that these would be applied at, must be from climbing in

i dont think it was me bc i sit down and swing my legs in and if i hit anything its the black plastic just on the inside that holds the carpet in place.

I dont think i would want them after hearing is just adhesive that holds them on. i dont want to drill of course but wont that trap dust dirt, even if you prep the area good, and if you ever take them off

good luck trying to fix the paint fade

Do you really think it is going to fade much on the inside of the door?

I suppose if you leave the car parked and the doors open a bit, in the sunlight it may fade over time.

I got another scratch in the door again today. I'm wondering now if maybe something was on the underside of the door (small rock), and closing the door does it.

Ranger40 · 04-05-2010, 06:45 AM

I picked up a set from Late Model Restoration within a week of getting the car. Peel n' stick, black powder coated billet aluminum.

http://www.latemodelrestoration.com/...ettering-Black

steallife904 · 04-05-2010, 07:28 AM

i just purchased them from gmpartsdirect. I think they were like 76. 80 or so after shipping. They are worth it they look great on the car. They come with a template so you can get them on even. Just take your time so you do a good job. Make sure it looks even before you stick them on!!!

wylde1 · 04-07-2010, 05:24 PM

I love the look of those chevrolet ones that came on my 1SS.

i keep kicking the door speaker though getting in and the dirt is hard to clean out of that mesh haha I'm gonna have to figure out some sort of speaker cover that's easier to clean. Or be more careful getting in.... but i'm usually too excited to get in the car to care if my foot touches something on the way in haha

03-28-2010, 08:06 PM	#1
HopeRidesAlone Drives: 2010 Camaro Black 2SS/RS Join Date: Mar 2010 Location: Maryland Posts: 839 View My Garage	Door Sill Plates I have a 2LT and want those plates on it i know only the 2ss come with it and i found where i can buy them is there anything i need to know about installing them?

04-04-2010, 08:45 PM	#10
5THGENRS Drives: 2010 IOM 2LT RS, 08 IOM G8 GT, 87ta Join Date: Dec 2009 Location: Indiana Posts: 591 View My Garage	they are $76 at chevypartsplus. I want these after i got scratches in the area that these would be applied at, must be from climbing ini dont think it was me bc i sit down and swing my legs in and if i hit anything its the black plastic just on the inside that holds the carpet in place. I dont think i would want them after hearing is just adhesive that holds them on. i dont want to drill of course but wont that trap dust dirt, even if you prep the area good, and if you ever take them off good luck trying to fix the paint fade __________________ 1000 = Order Placed (11/16/2009) RS Constraint 1100 = Preliminary Order Accepted (1/9/2010) Order # NSPHF8 2000 = Accepted by GM (1/12/2010) 2500 = Preferenced (1/12/2010) 3000 = Accepted by Production (1/13/2010) TPW = (2/8/2010) 3100 = Sequenced (1/29/2010) 3300 = Scheduled (1/29/2010) 3400 = Broadcast (1/29/2010) 3800 = Produced (2/10/2010) VIN # 2G1FG1EVXA9192608 4150 = Invoiced (2/11/2010) 4200 = Shipped (2/12/2010) 5000 = Delivered to Dealer (2/24/2010) 6000 = Delivered to Customer (3/1/2010)

04-07-2010, 05:24 PM	#14
wylde1 I am the Stig Drives: Black w/ IOM stripe 1SS Join Date: Jan 2010 Location: Saskatoon, SK, CAN Posts: 1,312	I love the look of those chevrolet ones that came on my 1SS. i keep kicking the door speaker though getting in and the dirt is hard to clean out of that mesh haha I'm gonna have to figure out some sort of speaker cover that's easier to clean. Or be more careful getting in.... but i'm usually too excited to get in the car to care if my foot touches something on the way in haha __________________ 2010 Camaro - 1SS, Black w/ Orange stripes

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Product! Camaro SS or RS Stainless Steel Door Sill Plates (Scuff Plates)	RPI Designs	Cosmetics and Lighting Modification Discussions	17	07-31-2020 07:28 AM
New from RPI Designs! Camaro engraved Billet Chrome & Billet Black Door Sill Plates!	RPI Designs	Interior Parts & Accessories	14	03-01-2017 07:24 AM
IL house bill 4888 (no front plate)	liquidfire350	USA - Great Lakes	41	05-27-2010 03:19 PM
New Product! Camaro SS or RS Stainless Steel Door Sill Plates (Scuff Plates)	RPI Designs	Exterior Parts & Accessories	4	03-01-2010 05:30 PM

03-28-2010, 08:45 PM	#3
HopeRidesAlone Drives: 2010 Camaro Black 2SS/RS Join Date: Mar 2010 Location: Maryland Posts: 839 View My Garage	Thank you one more question i take it the sills come with a adhesive on the back on them?

03-28-2010, 09:00 PM	#5
HopeRidesAlone Drives: 2010 Camaro Black 2SS/RS Join Date: Mar 2010 Location: Maryland Posts: 839 View My Garage	Alright ill Try it out that you for the quick help

03-28-2010, 09:13 PM	#6
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	Not a problem. They are worth it. I got some deep gouge on my passenger door sill somehow. No idea how. The sill plate would have helped that.

04-05-2010, 06:45 AM	#12
Ranger40 Drives: Malibu, g6, camaro Join Date: Sep 2009 Location: Kansas Posts: 39	I picked up a set from Late Model Restoration within a week of getting the car. Peel n' stick, black powder coated billet aluminum. http://www.latemodelrestoration.com/...ettering-Black

04-05-2010, 07:28 AM	#13
steallife904 Drives: 2010 iom camaro 2lt Join Date: Mar 2010 Location: Jacksonville, Fl Posts: 192 View My Garage	i just purchased them from gmpartsdirect. I think they were like 76. 80 or so after shipping. They are worth it they look great on the car. They come with a template so you can get them on even. Just take your time so you do a good job. Make sure it looks even before you stick them on!!!