04-29-2010, 11:35 AM | #1 |
Drives: Camaro LS Join Date: Apr 2010
Location: Columbus GA
Posts: 354
|
Put my blackouts (Black10) on and Painted the bezels. Black bowties too.
For the bowties, i went to walmart and bought some vinyl. Was easy as hell to put on. Just make sure you got a sharp razor.
So i bought my blackouts from Black10. Fast shipping! They were cake to put on.....a hair drier is your friend when doing this! I only have 1 tiny mess up where the tint got wrinkled. But you cant see it unless you are looking right at it. And you cannot see it in the pics. Its in the corner almost covered by the bezel.... I also had a few bubbles that i couldnt get out. But i left the car in the sun and it dried those right up! I painted the Bezels myself. Sanded with fine grade, applied 3 coats of a clear primer, applied 4 light coats of flat black....didnt clear coat them cause i wanted the flat black look. The rustoleum says it doesnt chip or fade....so i think im good to go! The paint job only cost be 10 bucks! So you can either go spend tons of cash on new bezels or go to auto store and take 3 hours and do it yourself! Only issue i had with the paint was after i put on the first coat, i realized it was a dusty day and i had dust all in the paint....had to sand down and re do that coat in my garage. No biggie. Pics |
04-29-2010, 03:27 PM | #2 |
2017 SS
|
Looks nice, were the rear bezels hard to take off? Also one stupid question, what department did you get tbe vinyl from at walmart?
|
04-29-2010, 03:34 PM | #3 |
Drives: Camaro LS Join Date: Apr 2010
Location: Columbus GA
Posts: 354
|
^ nope, theres a video on how to take them off on this forum. Really easy once you get it started. The vinyl was in the craft dept.
|
04-29-2010, 03:54 PM | #4 |
2017 SS
|
Thanks I have already done my blackout kit. This can be my next weekend project.
|
04-29-2010, 06:10 PM | #5 |
|
Great job bro!!!
__________________
Added Mods
-------------------- Installed: Tinted Windows; EiBach Lowering Springs; Custom Exhaust; Lloyd Carpets; AirRaid CAI; Heritage Grill; Razzi GFX; Light Blackout Kit; MPD1 Dovetail Spolier; SS Badges from DefenderWorxs; T-Rex Bumper Grill; Bowtie & Tail Light Bezel Re-Coloring; Stealth Bulbs; Magg Wheels 22" (Nitto INVO tires Fronts: 255/35-22 - Rears: 285/30-22) When money Available: Brake Calipers Painted; Clear Car Cover; Custom Pedals; Custom Dash Plaque from EmblemPros.com; Double Din GPS/Stero Unit |
04-29-2010, 10:17 PM | #6 |
Red 2SS
Drives: Camaros Join Date: Jun 2009
Location: Kuwait
Posts: 314
|
Awesome ! great job
__________________
2010 Camaro 2ss L99 Red - Kooks+Corsa+VR+Ebiach LowerKit- 2002 Camaro SS LS1 Black - Kooks+SLP+Hurst- 2009 Escalade Pearl White - Corsa - |
04-30-2010, 10:35 AM | #7 |
Drives: 2010 Chevy Camaro SS/RS Join Date: Jul 2009
Location: Iowa
Posts: 169
|
Where's the video located for dissassembly of the rear tail light bezels? I'll do a search.
__________________
2010 2SS/RS
3" MagnaflowComp Series Exhaust Airaid CAI MGW Short throw shifter Kooks LT Headers/Hi flow Cats Vmax TB |
04-30-2010, 12:29 PM | #8 |
Drives: Camaro LS Join Date: Apr 2010
Location: Columbus GA
Posts: 354
|
|
04-30-2010, 03:43 PM | #9 |
|
|
|
|