Does anyone have an image of SLP rear "SS" emblem ... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bowtie Junkman · 05-03-2010, 06:52 PM

Does anyone have an image of what the SLP traditional "SS" badges look like ... namely the REAR one?

I know they have pictures on the website ... but here's my dilemna ...

They say (the rear) has a black, oval-shaped "landing pad" that affixes to the deck lid (to cover the holes) and the "SS" letters affix to it. The picture on the website is of a car that has a blacked-out rear panel. I'm just wondering what this emblem/panel is going to look like on a car that isn't black or doesn't have a blacked-out rear panel (my car is VR) .... wondering if it will look funny or blend in ...

Thanks in advance for any help ...

nvpliers · 05-07-2010, 06:07 PM

This thread may help. This page has pics on a non-black-out panel, but not sure if it is the SLP SS.

http://www.camaro5.com/forums/showth...nel+SLP&page=4

NVMY68SS · 05-08-2010, 08:59 AM

I don't believe that thread has any SLP emblems in it.

As for what it looks like, imagine a black refrigerator magnet that is straight on the top and bottom and curved on the ends. I've got one, but don't have any pics of it. It's a shame that GM decided to put two holes in the decklid, otherwise this piece wouldn't be needed.

I've got the front and rear SLP SS emblems with the rear pad if anyone wants them. PM me.

jlugo · 05-08-2010, 10:43 AM

"wondering if it will look funny"....it does looks like a refrigerator magnet!

BackinBlackSS/RS · 05-08-2010, 10:48 AM

Personally I would have the holes filled in and painted and then apply the badges.

SSTony · 05-08-2010, 11:48 AM

i blacked out my rear trunk and then i installed mine. you cant even tell that its there

tiresmokindad · 06-11-2010, 11:26 PM

Quote:

Originally Posted by Bowtie Junkman

Does anyone have an image of what the SLP traditional "SS" badges look like ... namely the REAR one?

I know they have pictures on the website ... but here's my dilemna ...

They say (the rear) has a black, oval-shaped "landing pad" that affixes to the deck lid (to cover the holes) and the "SS" letters affix to it. The picture on the website is of a car bras that has a blacked-out rear panel. I'm just wondering what this emblem/panel is going to look like on a lebra car bras that isn't black or doesn't have a blacked-out rear panel (my car is VR) .... wondering if it will look funny or blend in ...

Thanks in advance for any help ...

I shoot the picture of my SS badges. I will post it immediately after they are developed. The emblem signifies that it is effective and a mark of efficiency. It it nice and looks good for me.

harmonicator · 06-13-2010, 02:08 PM

I decided to go with a hybrid look. 69 "SS" on the front and bowtie on the back. I ordered SLP's grille insert, but I got an authentic 69 "SS" from Rickscamaro.com. Looks way more authentic and high quality than the SLP fridge magnet. It comes with pins on the back that I will have to cut off and sand down, then attach with emblem tape on to the insert.

Got the idea from fellow member Boomboomkid.

JEFF2010SSMANUAL · 06-13-2010, 02:48 PM

OK

faSSt · 03-18-2011, 09:05 AM

I know i am resurecting a dead thread, but i wish i would of known what i am about to share before i ordered my SLP kit.

my 2011 2SS DOES NOT HAVE THE TWO HOLES IN THE TRUNK after removing the bowtie!! So i could've only used the SS emblem on my factory paint with no holes if i chose to.

Secondly, If you are doing the black out decal, there is no reason to add that thick "refrigerator magnet' over top, the holes will already be covered.

I just did the black out decal and stuck the "SS" indiviualy on the black out without using the 'fridge magnet' it's a very clean look. I will post pics sometime this weekend.

05-03-2010, 06:52 PM	#1
Bowtie Junkman Drives: 2000 Camaro SS Join Date: Jan 2010 Location: Long Beach CA Posts: 287 View My Garage	Does anyone have an image of SLP rear "SS" emblem ... Does anyone have an image of what the SLP traditional "SS" badges look like ... namely the REAR one? I know they have pictures on the website ... but here's my dilemna ... They say (the rear) has a black, oval-shaped "landing pad" that affixes to the deck lid (to cover the holes) and the "SS" letters affix to it. The picture on the website is of a car that has a blacked-out rear panel. I'm just wondering what this emblem/panel is going to look like on a car that isn't black or doesn't have a blacked-out rear panel (my car is VR) .... wondering if it will look funny or blend in ... Thanks in advance for any help ...

05-07-2010, 06:07 PM	#2
nvpliers Drives: 2010 2SS RS Red Jewel Tint Join Date: Apr 2010 Location: Kentucky Posts: 373	This thread may help. This page has pics on a non-black-out panel, but not sure if it is the SLP SS. http://www.camaro5.com/forums/showth...nel+SLP&page=4 __________________ Kooks 1 7/8 LT Headers / K&N High Flow Intake / Magnaflow competitive X-pipe Cat-Back / Tune / 3M Clear Bra Protection

05-08-2010, 08:59 AM	#3
NVMY68SS Drives #296 Drives: 1968 Camaro SS - 350/5 Speed Join Date: Aug 2007 Location: Smithfield, NC Posts: 953	I don't believe that thread has any SLP emblems in it. As for what it looks like, imagine a black refrigerator magnet that is straight on the top and bottom and curved on the ends. I've got one, but don't have any pics of it. It's a shame that GM decided to put two holes in the decklid, otherwise this piece wouldn't be needed. I've got the front and rear SLP SS emblems with the rear pad if anyone wants them. PM me. __________________ #296 Delivered 6-1-09 Dynoed 10-3-09 384.56HP 387.65TQ with the bolt-ons listed, no tune.....yet! Roto-Fab CAI (Install pics here), Doug Thorley Shorties, Flowmaster American Thunder 409S Cat Back Vid

05-08-2010, 10:43 AM	#4
jlugo Account Suspended Drives: 2014 1LE 'Summit White' Join Date: Jul 2009 Location: Temple, Texas Posts: 2,351 View My Garage	"wondering if it will look funny"....it does looks like a refrigerator magnet! Attached Images

05-08-2010, 11:48 AM	#6
SSTony Drives: SS Camaro Join Date: Jul 2009 Location: Piscataway NJ Posts: 1,782 View My Garage	i blacked out my rear trunk and then i installed mine. you cant even tell that its there __________________

05-08-2010, 10:48 AM	#5
BackinBlackSS/RS Go Blue!!!!! Drives: 2012 Cruze LT Join Date: Mar 2009 Location: Indiana Posts: 23,290	Personally I would have the holes filled in and painted and then apply the badges.

06-13-2010, 02:08 PM	#8
harmonicator Super Lead Plexi Drives: "Elvira" 2010 Blk Camaro 3SS/RS LS3 Join Date: Feb 2010 Location: SLO, CA Posts: 149	I decided to go with a hybrid look. 69 "SS" on the front and bowtie on the back. I ordered SLP's grille insert, but I got an authentic 69 "SS" from Rickscamaro.com. Looks way more authentic and high quality than the SLP fridge magnet. It comes with pins on the back that I will have to cut off and sand down, then attach with emblem tape on to the insert. Got the idea from fellow member Boomboomkid. __________________ Originally Posted by kunkelz28 Torque !!!!!! It means you could have fat girls in your car and it will still be fast

06-13-2010, 02:48 PM	#9
JEFF2010SSMANUAL JEFF2010SSMANUAL Drives: IOM 2SS/RS LS3 Join Date: Aug 2008 Location: Northern IL Posts: 1,953	OK Attached Images

03-18-2011, 09:05 AM	#10
faSSt Sold n' Sad Drives: 11 F150 Supercrew FX4 5.0 Join Date: Nov 2010 Location: Cabot AR. Posts: 279 View My Garage	I know i am resurecting a dead thread, but i wish i would of known what i am about to share before i ordered my SLP kit. my 2011 2SS DOES NOT HAVE THE TWO HOLES IN THE TRUNK after removing the bowtie!! So i could've only used the SS emblem on my factory paint with no holes if i chose to. Secondly, If you are doing the black out decal, there is no reason to add that thick "refrigerator magnet' over top, the holes will already be covered. I just did the black out decal and stuck the "SS" indiviualy on the black out without using the 'fridge magnet' it's a very clean look. I will post pics sometime this weekend. __________________ 2011 Camaro 2SS, SIM, 6M, HUD, 10% tint, black out lenses, SS emblems, TSP 304 LT's, Roto-Fab, MGW shifter, gto res, 8K BFXENON, HP Tuners, Redline Fluids. *Sold* Now in an 11' F150 supercrew FX4. Still addicted to the this forum

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
SLP Landing Pad + Painted SS Emblem	scythezo6	Camaro Photos \| Spyshots \| Video \| Media Gallery	16	05-03-2010 03:51 PM
ENGINE COVER "SS" WHITE EMBLEM & POLISHED STAINLESS NAMEPLATE	Kirban Performance	V8 Bolt-Ons & Tunes	0	03-04-2010 01:45 PM
phantom or billet grille with the SLP heritage SS emblem?	Mustang Killa	Cosmetics and Lighting Modification Discussions	1	01-15-2010 09:29 PM
The Tom Henry Full Length Stripes, Rear Panel, Emblem Thread (new SS emblems)	TAG UR IT	Camaro Photos \| Spyshots \| Video \| Media Gallery	211	06-02-2009 08:05 PM