billet prototypes oil catch can review - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bmbbl be · 06-22-2010, 10:11 AM

i had looked at several catch cans. what i liked about billet prototypes was that i could order several different options, even the fittings had a option! they also have a knurled option which is helpful on the polished option when removing the bottom to empty. another reason i chose billet prototype was i wanted to install mine where the stud of the factory airbox is located, and theres has a bracket that allows mounting it there. for my install i fabricated a aluminum bracket to cover up the factory bracket so i could have a cleaner install.

here are a few pics of the finished product

here is a link to the site http://www.billetprototypes.com/

MadMav · 06-22-2010, 10:18 AM

Very nice job. I like it.

Mav

Hoverman · 06-28-2010, 11:39 AM

I want this also but have a question and I cant get them to contact me?

ZZIXX · 06-28-2010, 01:32 PM

Looks great, very clean install. Nice job.

HaZe_X · 06-28-2010, 04:48 PM

Looks great, I'm extremely happy with mine also!

Quote:

Originally Posted by Hoverman

I want this also but have a question and I cant get them to contact me?

PM Jamesbiz, he's on this site...post your question though, maybe me or the OP can help...

The Yeti · 06-28-2010, 10:24 PM

I just got mine BP catch can today and can't wait to put it on. I have the same setup as HaZe.

bmbbl be · 06-29-2010, 11:04 AM

as far as quality goes, billet prototypes is good as gets and with ordering options!

Rockin the BlueSS · 06-29-2010, 12:48 PM

whats the inside look like? i am wondering if this is a design over function design or a nice looking can that works well... can anyone who has theres take some pictures of the inside?

thanks

The Yeti · 06-30-2010, 04:07 AM

Quote:

Originally Posted by Rockin the BlueSS

whats the inside look like? i am wondering if this is a design over function design or a nice looking can that works well... can anyone who has theres take some pictures of the inside?

thanks

Ask and thou shall recieve...

Shot at 2010-06-30

Nachos!! · 06-30-2010, 07:27 PM

Is that one for a G8 or do they have one for the camaro yet? I couldnt find it on the website. Also how much was it? Thanks!

2010 SSRS · 06-30-2010, 07:28 PM

nice looking mod

The Yeti · 07-01-2010, 03:47 AM

Quote:

Originally Posted by Nachos!!

Is that one for a G8 or do they have one for the camaro yet? I couldnt find it on the website. Also how much was it? Thanks!

The G8 GXP has an LS3 and the Camaro is built on the same Zeta platform so you can use the G8 catch with absolutely no modification required. It sits in the same spot in the engine bay essentially. Camaro is for the most part a two door version of the G8/Commodore. We can swap headers, rear differentials, and catch cans.

mikeSS · 07-01-2010, 04:00 AM

nice engine bay

Avalnch · 07-01-2010, 04:31 AM

Quote:

Originally Posted by Lazurus Man

The G8 GXP has an LS3 and the Camaro is built on the same Zeta platform so you can use the G8 catch with absolutely no modification required. It sits in the same spot in the engine bay essentially. Camaro is for the most part a two door version of the G8/Commodore. We can swap headers, rear differentials, and catch cans.

What do you do with the breather hoses that are pulled out? Also, are the install instructions on the BP website the same for the Camaro's LS3?

Thanks.

06-22-2010, 10:11 AM	#1
bmbbl be Drives: 2010 CAMARO SS Join Date: Apr 2010 Location: ohio Posts: 1,360	billet prototypes oil catch can review i had looked at several catch cans. what i liked about billet prototypes was that i could order several different options, even the fittings had a option! they also have a knurled option which is helpful on the polished option when removing the bottom to empty. another reason i chose billet prototype was i wanted to install mine where the stud of the factory airbox is located, and theres has a bracket that allows mounting it there. for my install i fabricated a aluminum bracket to cover up the factory bracket so i could have a cleaner install. here are a few pics of the finished product here is a link to the site http://www.billetprototypes.com/ Attached Images

06-22-2010, 10:18 AM	#2
MadMav Drives: 2010 SS/RS M6 Join Date: Nov 2009 Location: Falcon, CO Posts: 661	Very nice job. I like it. Mav __________________ SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.

06-28-2010, 11:39 AM	#3
Hoverman Drives: 2010 2ss Join Date: Sep 2009 Location: Washington Posts: 226	I want this also but have a question and I cant get them to contact me? __________________ LPE 417 Stroker, 780 Hp, 780 Tq Corsa Cat Back, LPE gt9 cam ARH LT Headers High flow cats Pfadt adj coilovers,Pfadt trailing arms, Pfadt Dif Bushings, Pfadt rear tie rods Hotchiss Cassis Brace, LPE 3.91 gears MGW shifter,Billetprototypes Catch Can LPE Pedals, LPE Sway bar links LPE custom ralley stripes, Paint upgrade and 4 coats of clear Lingengelter Embroidered Headrest Foose wheels, LPE Brake calipers with slotted rotors Hotchiss/LPE Strut Brace,

06-28-2010, 01:32 PM	#4
ZZIXX Blown SS Drives: 1969 Camaro RS, 2010 RS/SS Join Date: Oct 2008 Location: Ambler, PA Posts: 204 View My Garage	Looks great, very clean install. Nice job. __________________ Jeff SIM 2SS/RS M6 TVS 2300, Comp Cam, ARH, 3" JBA Exhaust, ADM Race CAI, KB BAP, Hurst, BMR, Pfadt Suspension 610RWHP/602RWTQ My Build Thread

06-28-2010, 10:24 PM	#6
The Yeti On the wrong side of town Drives: Pontiac G8 GT Join Date: Jun 2010 Location: Bay Area Cali Posts: 59	I just got mine BP catch can today and can't wait to put it on. I have the same setup as HaZe. __________________ *The Yeti - just an 11sec NA grocery getter!!!* 08 G8 GT Premium/Sports Package W/Sunroof Pat G Tuned, Heads/Cam/gears/Stalled, Dropped, Brembos on all 4 corners and every bolt on under the sun. April 2011 G8 of the Month June 2012 G8 of the Month April 2013 G8 of the Month @G8BOARD.COM

06-29-2010, 11:04 AM	#7
bmbbl be Drives: 2010 CAMARO SS Join Date: Apr 2010 Location: ohio Posts: 1,360	as far as quality goes, billet prototypes is good as gets and with ordering options!

06-29-2010, 12:48 PM	#8
Rockin the BlueSS The New Guy Drives: 2010 2SS/RS IBM M6 Join Date: Sep 2009 Location: Cali Posts: 1,147	whats the inside look like? i am wondering if this is a design over function design or a nice looking can that works well... can anyone who has theres take some pictures of the inside? thanks __________________ Wiper Reservoir Relocation Thread

06-30-2010, 07:27 PM	#10
Nachos!! Whos new car? NACHOS! HA Drives: CGM 2SS/RS M6 Join Date: Jul 2009 Location: Haughton LA Posts: 86	Is that one for a G8 or do they have one for the camaro yet? I couldnt find it on the website. Also how much was it? Thanks! __________________

06-30-2010, 07:28 PM	#11
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	nice looking mod __________________ Jannetty Racing JRE Street Package

07-01-2010, 04:00 AM	#13
mikeSS Drives: 2015 c7 Join Date: Nov 2009 Location: MI Posts: 7,462	nice engine bay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Camaro Oil Change	adub4185	Camaro DIY & HOW-TO instructions & discussions	180	04-23-2014 07:11 PM
GM's OLM & synthetic oils.	duder4thgen	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	1	03-24-2010 12:37 PM
gas prices.	Congoman775	General Automotive + Other Cars Discussion	65	05-28-2008 01:20 PM
Major U.S. oil source is tapped	KILLER74Z28	Off-topic Discussions	32	10-30-2007 10:47 AM