TR6060 grinding into 2nd under high RPM. Common?
 

I have to baby it into second if Im getting on it. Clutch pedal in and slowly go into second. If I dont, it will grind all the way through until it catches.

Is this particular problem a common one with this trans, or do I have issues?

Very common most everyone has the problem. Do a search there are tons of threads and info on this subject.

tick braided clutch line and idealgarage's master cylinder work for a lot of people

Thats what I thought. I remember cruising over a thread a while back before I joined the site and it was mentioned.

Yep mine did it right from new. Under heavy acceleration it will grind going into second even when its warmed up.

this....

Mine was 3rd gear grind though. Ideal G master cylinder fixed it tho. no probs now :D And I change out the clutch fluid very very regularly.

Tick high flow clutch line, ideal garage high flow master clutch cylinder, upgraded clutch return spring, separate your clutch from your brakes and use good fluid. Just got all my stuff along with new rotors and pads. Can't wait to install it all.

Agreed with everything from the above poster except for the return spring since I haven't found the need for it so I have not experience with it

Otherwise yes the IdealG master is a good swap although the price is rather high. Nothing you an really do about that.

Some people have gotten their dealer to replace the syncros to carbon instead and bronze fork pads Ect.look on tick performances website for more info on the 'upgrade' Others have had the entire transmission 100% replaced along with the clutch(all oe parts) and still had issues.
If you want a solid fix for now till you have good reason for a new clutch and slave the idealG master and separating the fluids is the way to go!
Good luck

The clutch return spring helps when or if you have your clutch sticking. Granted the other stuff should fix this issue but I am tired of dealing with it so I got everything I could to make sure I covered all the bases to make the clutch work like it should of in the first place.

Had this BAD on my 10 which is why i got rid of it. In a 13 with zero issues on this tranny.

There are people with new 1LE's that have reported this issue so it seems to be more of a hit or miss, quality control issue with the TR6060. At least for the SS/1LE.

http://www.camaro5.com/forums/showthread.php?t=261882

Its annoying. Sooner or later something is going to break. I need to get everthing ordered and get it fixed. Thanks for the help guys.

FYI... a law firm is looking into claims regarding this issue.

http://www.girardgibbs.com/chevy-camaro-lawsuit/

Having the same issue with my 13 1LE