Possible to put LS3 in place of LS1??
 

Hi

Is it possible to put LS3 engine on my LS1 CAMARO SS ?? or the gear need to be changed also??

cauz im thinking to replace my current LS1 to LS3 engine

any advice and tips??

anything is possible.

they put LS7s in solstices.

Or put an LSX....any reason why you settled on the LS3 crate?

with this it is basically a bolt in swap:

http://www.lingenfelter.com/mm5/merc...gory_Code=C163

I know bro but do i've to change the transmation with it or no that will e the question

cauz the LS3 engine is avalible around 6500 USD and my current engine its mixing oil with water AGIAN!! ,i did overhaul for it before monthe's but unfortunately this time is decreasing the amount of oil in the engine and im finding them in the radiator agian

where i can find LSX engine??

no you do not have to change the transmission, the LS3 engine will bolt in place of any LSx engine,,

i didnt get it,so do i have purchase this thing when im installing the new LS3 engine in my LS1 camaro??

thanx bro,it helped a lot,it less i've to buy the engine only w/o suffering to pay for the transmation :happyanim:

thanx

Probably just a head gasket blown. Who did the last one? Use Fel pro and make sure you torque it with a torque wrench.

i didnt understand why it happend anyway cauz the gasket's are new from the dealer also the temp is normal the weather is nice here during this time of the year and I use it around 2000 mile after the overhauling and agian it started mixing oil with water

btw there's no Fel Pro gasket for 1997-1998 engine cauz this engine in my car is replaced with c5 engine (from 01 ss engine to 97-98 c5 engine)

It will fit very well. The LS3 is a great motor. I would recommend, however, having some fun before the install. Make sure to upgrade some internals in case you want a beast in your garage.

We will be selling our brand new Ls3 from our 2010
 

Just wanted to let you know we will have our 2010 LS3 available .

I will even throw in our ADM cam with it .

You can see the dyno here - http://www.camaro5.com/forums/showthread.php?t=11299

Call me and I will make you a hell of a deal.

214-228-8782

Andy

yes it is doable. I would think for the price you could build an ls1 with simular or better performance for much much less. A set of heads and a cam on an ls1 will go a long way and be cheaper. If you build an ls1 stroker you can get the same displacment or better than the ls3.