01-12-2012, 08:48 PM | #15 |
Building the Beast
|
wow bump for a great deal. wish i had the money, you're so close by...great setup.
glws
__________________
|
01-12-2012, 08:48 PM | #16 |
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
More info on head work
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
01-13-2012, 12:25 AM | #17 |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
The heads was done by Cartek, double valve springs, new valve seals, new Titanium retainers and some porting, the car made 738rwhp with these heads on my stock motor with a F1 Cam and 12lbs boost which was done by Cartek.
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
01-13-2012, 12:39 AM | #18 |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
Water pump and alternator are not included, will post some pictures tomorrow.
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
01-13-2012, 08:18 AM | #19 |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
01-13-2012, 09:26 AM | #20 |
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
So can u sell stock longblock for 5k if it sits like this one? Can you get me some info on
clearances:Piston to wall, ring end gap, rod side clearance, pin clearance, main bearing clearance, rod clearance, values it was torqued to, and what additional prep work was done to the block besides basic machining
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
01-13-2012, 09:38 AM | #21 | |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
Quote:
http://www.camaro5.com/forums/showthread.php?t=192939 When I said $5k I was referring to a stock LS3 motor I had which was sold for $5k and here is another selling for $5200.00. Can you call my builder and tell him its Mario Second LS3 motor which was built as a spare, his name is Mike (a very nice guy) and his number is 1 732 232 8174 from MCP Engine Builders. Mike will answer any question you have pertaining to this motor.
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
|
01-13-2012, 10:05 AM | #22 |
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
Thanks. Ok mine has dod/afm delete and cam springs and such with no intake manifold was l99 to ls3 coverted
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
01-13-2012, 11:35 AM | #23 |
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
Mike did not know brand of springs and such do you? Also does it have oil pan?
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
01-13-2012, 11:55 AM | #24 | |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
Quote:
Well I guess you spoke to Mike, yes the heads was done by Cartek and the springs are dual Comp Cam 921. Yes it have the oil pan, oil pump and pickup with strainer, the motor is closed ready for install.
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
|
01-13-2012, 11:58 AM | #25 |
NOW CAMMED & SUPERCHARGED
Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008
Location: Ar
Posts: 2,336
|
Ok thanks my builder is checking specs says piston to wall clearance is huge so waiting on his imput
__________________
Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99
|
01-18-2012, 07:32 AM | #26 |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
01-25-2012, 08:10 AM | #27 |
Drives: sweet Join Date: Jan 2010
Location: next to God
Posts: 47
|
__________________
Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.
|
02-15-2012, 10:13 PM | #28 |
Drives: 1 Join Date: Mar 2010
Location: 2
Posts: 412
|
Awesome deal, I so want to pull the trigger on this engine. GLWS! Any video of your current engine running since you say this is very close, spec wise?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LS3 motor mount bolt | Coop | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 12 | 12-13-2010 07:23 AM |
LS3 motor parts | fuffl | V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment | 11 | 04-08-2010 06:46 PM |
SPONSORS - 427 Forged LS3 Shortblock | StrictlyPro | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 17 | 03-10-2010 05:38 PM |
Great Read and Info on Oil Weight | Banshee | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 1 | 11-23-2009 09:03 PM |