COPO Hood - Like or No Like - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HufferSS · 06-07-2012, 06:50 PM

Quote:

Originally Posted by blackonblacksls

why not just throw a lot more power at it? should loosen up some!

Lol...how much power do you think a little 436 has left in it after 1200?

Sales @ ECS · 06-07-2012, 08:23 PM

Quote:

Originally Posted by Chris-HPS

I guess I should of clarified. The serpentine belts work great up to the F1R. We were also making 22-23psi on robs C5 procharged F1R with a 10rib. The F2 and F1X will require a cog or direct drive. We have tried up to the 12 rib setup on the F2 with the flipdrive kit on my C6 and only able to produce 10psi. That seemed to be were the compressed air pressure was enough to slip the belt.

Chris

Agreed.. I have run the F1R serpentine setups.. Have no experience with the new F1X. All the F2+ that I did back at my old shop were COG or G/D.

Huffer: Timeslips may not be too far off for me

jrpxxii · 06-07-2012, 08:27 PM

Quote:

Originally Posted by Matt @ ECS

Agreed.. I have run the F1R serpentine setups.. Have no experience with the new F1X. All the F2+ that I did back at my old shop were COG or G/D.

Huffer: Timeslips may not be too far off for me

Very clean install there Matt. Looks good. Cant wait for all of us to meet up at the same time at an event as it will be a very impressive field with everyone going big this year.

Sales @ ECS · 06-08-2012, 07:58 AM

jrp: It's going to be a fun season (Seems as we are all starting a bit late, but thats fine for the fall air!).. We are looking forward to C5 Fest to meet the rest of the crew from here!

Huffer and your build are definitely a lot more extreme than mine. I am trying to hold on to every aspect of my 'street' car, it's very hard to not strip it out and make it a full race car!

HufferSS · 06-08-2012, 08:09 AM

Quote:

Originally Posted by Matt @ ECS

jrp: It's going to be a fun season (Seems as we are all starting a bit late, but thats fine for the fall air!).. We are looking forward to C5 Fest to meet the rest of the crew from here!

Huffer and your build are definitely a lot more extreme than mine. I am trying to hold on to every aspect of my 'street' car, it's very hard to not strip it out and make it a full race car!

Nice try Soriani but that crap don't float. Your car is every bit as "extreme" as mine. I am more street car than you as I still have overdrive.

Your junk isn't even running and you're already back pedaling.

kryp2nite · 06-08-2012, 03:55 PM

Bill PTC makes a great product theyre are lots of people around here running them with great success. Call Kenny Ford at PTC and see what he says

Sales @ ECS · 06-09-2012, 10:45 PM

Quote:

Originally Posted by HufferSS

Nice try Soriani but that crap don't float. Your car is every bit as "extreme" as mine. I am more street car than you as I still have overdrive.

Your junk isn't even running and you're already back pedaling.

Your car is making passes and mine is not... So ya you win

You'll be faster than me this year and that was expected. I am an ECS Tommy built 4L60E, on a street Novi 2200 blower that I'll be able to drive to Indianapolis from Cream Ridge NJ on it

Have another customer/friend with a similar setup with an ECS 4L80E, hes driving his setup from Chicago to us for some updates and then back to Chicago to then meet us at C5 Fest.

Any passes this weekend or are you waiting for verter restall ?

HufferSS · 06-10-2012, 08:14 AM

Quote:

Originally Posted by Matt @ ECS

Your car is making passes and mine is not... So ya you win

You'll be faster than me this year and that was expected. I am an ECS Tommy built 4L60E, on a street Novi 2200 blower that I'll be able to drive to Indianapolis from Cream Ridge NJ on it

Have another customer/friend with a similar setup with an ECS 4L80E, hes driving his setup from Chicago to us for some updates and then back to Chicago to then meet us at C5 Fest.

Any passes this weekend or are you waiting for verter restall ?

Car is torn apart with the converter out of it. Original plan was to send the Coan back but that changed...so we're waiting on the FTI. I hope we can make some passes Friday night and get the comp license passes out of the way.

v8chick02 · 02-16-2013, 07:40 PM

Just wondering where I can buy this hood?! I can't find it on the Internet anywhere or on vengeance racings website. Thanks!

POWERFREAK · 02-16-2013, 07:49 PM

Quote:

Originally Posted by v8chick02

Just wondering where I can buy this hood?! I can't find it on the Internet anywhere or on vengeance racings website. Thanks!

Did you search here? Ohio speed makes one, there has been some threads on it.

jordan 572 · 02-16-2013, 08:29 PM

Where is the Huff?

v8chick02 · 02-16-2013, 10:59 PM

I saw the one from Ohio speed but I really like the vengeance racing one much better!

POWERFREAK · 02-17-2013, 06:18 AM

Quote:

Originally Posted by v8chick02

I saw the one from Ohio speed but I really like the vengeance racing one much better!

Harwood makes one too (looks more like the one in the op). I didnt read through all the posts, not sure if vengeance actually makes it.

jrpxxii · 02-17-2013, 11:43 AM

I have the same hood and its a VFN Sunoco hood.

02-16-2013, 07:40 PM	#135
v8chick02 Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009 Location: Frederick, MD Posts: 76	Just wondering where I can buy this hood?! I can't find it on the Internet anywhere or on vengeance racings website. Thanks! __________________ 2010 Camaro 2SS/RS Black w/ Silver Rally Stripes, 21" Wheels, Painted Ground Effects, Whipple S/C, Stage 2 Blower Cam, 2400 Stall Converter, Roto Fab CAI, Borla Long Tube Headers W/ No Cats, Borla Catback Exhaust, ZL1 Fuel Pump w/ BAP, ZR1 MAP Sensor, ZR1 Spark Plugs, Line Lock, Tuned by Livernois, Eibach ProKit Lowering Springs 613 RWHP

02-16-2013, 10:59 PM	#138
v8chick02 Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009 Location: Frederick, MD Posts: 76	I saw the one from Ohio speed but I really like the vengeance racing one much better! __________________ 2010 Camaro 2SS/RS Black w/ Silver Rally Stripes, 21" Wheels, Painted Ground Effects, Whipple S/C, Stage 2 Blower Cam, 2400 Stall Converter, Roto Fab CAI, Borla Long Tube Headers W/ No Cats, Borla Catback Exhaust, ZL1 Fuel Pump w/ BAP, ZR1 MAP Sensor, ZR1 Spark Plugs, Line Lock, Tuned by Livernois, Eibach ProKit Lowering Springs 613 RWHP

02-17-2013, 11:43 AM	#140
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	I have the same hood and its a VFN Sunoco hood. __________________

06-08-2012, 07:58 AM	#130
Sales @ ECS Drives: 2011 CG 2SS Join Date: Oct 2009 Location: East Coast Supercharging 609 752 0321 Posts: 708	jrp: It's going to be a fun season (Seems as we are all starting a bit late, but thats fine for the fall air!).. We are looking forward to C5 Fest to meet the rest of the crew from here! Huffer and your build are definitely a lot more extreme than mine. I am trying to hold on to every aspect of my 'street' car, it's very hard to not strip it out and make it a full race car!

06-08-2012, 03:55 PM	#132
kryp2nite Drives: 2012 rs ss Vengeane edition Join Date: Sep 2010 Location: Ky Posts: 23	Bill PTC makes a great product theyre are lots of people around here running them with great success. Call Kenny Ford at PTC and see what he says

02-16-2013, 08:29 PM	#137
jordan 572 Drives: none Join Date: Jul 2008 Location: MN Posts: 1,720 View My Garage	Where is the Huff?