Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vitesse Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Sponsors Camaro Builds / Project Cars


Reply
 
Thread Tools
Old 06-14-2013, 08:02 PM   #205
Mr Twisty


 
Mr Twisty's Avatar
 
Drives: the 2nd amendment home
Join Date: May 2008
Location: OK
Posts: 13,862
If I was a manufacturer I'd be sending boxes of freebies your way just hoping folks saw my parts on your car!

Do you have sponsors?

What business are you in if you don't mind me asking?

I worked for an OCD car guy back in my highschool days, built beautiful sand rails! This thread gave me flashbacks to aluminum oxide blackface LOL... You're doing BEAUTIFUL work! Can't wait to see the finished product!
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin
Mr Twisty is offline   Reply With Quote
Old 06-14-2013, 11:41 PM   #206
www.MorenoMotorsports.com
~ G5Carbon.com ~

 
www.MorenoMotorsports.com's Avatar
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 3,090
Quote:
Originally Posted by Mr Twisty View Post
If I was a manufacturer I'd be sending boxes of freebies your way just hoping folks saw my parts on your car!

Thanks, I'm going to have you be my spoke person, LOL

Do you have sponsors?

I do.......... American Express, Master card and Visa, LOL.................. jk,............ LC and Vroomapunk and funding the whole project. I understand they are currently taking on more projects, you might want to hit them up!

What business are you in if you don't mind me asking?

Justin and I are full time students in college and we also work with our dad in his life insurance agency as license agents.


I worked for an OCD car guy back in my highschool days, built beautiful sand rails! This thread gave me flashbacks to aluminum oxide blackface LOL... You're doing BEAUTIFUL work! Can't wait to see the finished product!
Thanks again Twisty, we really appreciate your kind words


Quick update:


We need to clean out the insulation were we are going to have the plated welded for the roll cage.

But we figured we'd go the extra mile and remove all of it.


This stuff is literally as hard as a rock!

Name:  006.jpg
Views: 2192
Size:  160.5 KB

Had to set the car on fire to get that stuff out! RJ kept coming to mind, I'm not sure why. I don't think I would have posted this picture if the car burned down to the ground, just saying, LOL

Name:  008.jpg
Views: 2188
Size:  103.0 KB

Some elbow grease with a scraper.

Name:  009.jpg
Views: 2169
Size:  140.0 KB

Orbital sanding and 120

Name:  010.jpg
Views: 2170
Size:  104.9 KB

Sprayed with wash and grease remover

Name:  011.jpg
Views: 2170
Size:  138.9 KB

Finally......... a few coats of etching primer

Name:  012.jpg
Views: 2160
Size:  110.9 KB

We will be putting some sort of insulation back on the wall as the factory insulation has holes for the air box, ac hoses and harness that wouldn't be to effective. Being we are not reinstalling any of that stuff.

FYI, received some great news today parts that will be making their debut on G5.R at SEMA. I wish I could share it with you guys but it still top secret. I'm just hoping everything goes as planed.

Stay Tuned
__________________
<img src=http://www.camaro5.com/forums/image.php?type=sigpic&userid=32176&dateline=1430409495 border=0 alt= />
www.MorenoMotorsports.com is online now   Reply With Quote
Old 06-15-2013, 06:50 AM   #207
572HP
ACE5 (Atlanta Group)
 
572HP's Avatar
 
Drives: "Black Ice"
Join Date: Sep 2010
Location: Suwanee, GA
Posts: 1,704
Quote:
Originally Posted by Nathan Moreno View Post
Had to set the car on fire to get that stuff out!
Again ??? Oh...this time on purpose!

Quote:
Originally Posted by Nathan Moreno View Post
FYI, received some great news today parts that will be making their debut on G5.R at SEMA. I wish I could share it with you guys but it still top secret. I'm just hoping everything goes as planed.
I knew it...all of this weight savings is for the new wings. Don't worry...your secret is safe!
__________________
572HP is offline   Reply With Quote
Old 06-25-2013, 08:01 AM   #208
www.MorenoMotorsports.com
~ G5Carbon.com ~

 
www.MorenoMotorsports.com's Avatar
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 3,090
Quote:
Originally Posted by 572HP View Post
Again ??? Oh...this time on purpose!

I knew it...all of this weight savings is for the new wings. Don't worry...your secret is safe!
I guess you can say I can "laugh now", That was a pretty hair raising moment at the time. Coming out the garage and seeing the car up in smoke!!! I remember screaming for Seth to run out and a pull the battery cable off as I ran to get an extinguisher, scaring $htiz right there!

BTW, thanks for keeping the secret as long as you did......... we should definitely hit 1.5 Gs now

Small update:

Got the rear Stop Tech in yesterday. Should be another week for the fronts. All I can say is these things are BAD A$$!!! This by no means was a cheap propositions as they were an $8,000 upgrade! They will definitely help us reach our goal for project G5.R. We will keep the goal under raps for now.


Name:  011.jpg
Views: 2029
Size:  122.4 KB

You can see how they carve in between the pistons just to reduce as much weight as possible.

Name:  014.jpg
Views: 2029
Size:  98.4 KB

Changing from street pads to track pads couldn't be easier. Calipers don't need to be removed. Just remove the two bolts on "black colored" assembly and remove. Replace pads and reinstall, it that easy.

Name:  015.jpg
Views: 2127
Size:  117.1 KB
__________________
<img src=http://www.camaro5.com/forums/image.php?type=sigpic&userid=32176&dateline=1430409495 border=0 alt= />

Last edited by www.MorenoMotorsports.com; 06-25-2013 at 08:40 AM.
www.MorenoMotorsports.com is online now   Reply With Quote
Old 06-25-2013, 08:11 AM   #209
jeremywes
 
jeremywes's Avatar
 
Drives: 2012 Camaro SS
Join Date: Aug 2012
Location: Houston, TX
Posts: 506
those are bad a$$. Nice choice. Curious if you compared them in weight to the OEM rears.
jeremywes is offline   Reply With Quote
Old 06-25-2013, 08:28 AM   #210
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,280
Quote:
Originally Posted by jeremywes View Post
those are bad a$$. Nice choice. Curious if you compared them in weight to the OEM rears.
+1

I'd be interested to see if they were able to keep them at OEM weight - ideally less, but going from 4 to 6 pot adds a bit of weight lol
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 06-25-2013, 09:37 AM   #211
vroomapunk
[COTW 5/12/14]
 
vroomapunk's Avatar
 
Drives: 2012 CRT NF Cammed 2SS/RS
Join Date: Oct 2011
Location: NOLA
Posts: 6,098
Quote:
Originally Posted by Nathan Moreno View Post
I guess you can say I can "laugh now", That was a pretty hair raising moment at the time. Coming out the garage and seeing the car up in smoke!!! I remember screaming for Seth to run out and a pull the battery cable off as I ran to get an extinguisher, scaring $htiz right there!

BTW, thanks for keeping the secret as long as you did......... we should definitely hit 1.5 Gs now

Small update:

Got the rear Stop Tech in yesterday. Should be another week for the fronts. All I can say is these things are BAD A$$!!! This by no means was a cheap propositions as they were an $8,000 upgrade! They will definitely help us reach our goal for project G5.R. We will keep the goal under raps for now.


Attachment 527409

You can see how they carve in between the pistons just to reduce as much weight as possible.

Attachment 527410

Changing from street pads to track pads couldn't be easier. Calipers don't need to be removed. Just remove the two bolts on "black colored" assembly and remove. Replace pads and reinstall, it that easy.

Attachment 527411

Changing the pads without taking the calipers off is extremely bad ass.
__________________
vroomapunk is online now   Reply With Quote
Old 07-09-2013, 10:19 PM   #212
Mgizzle

 
Mgizzle's Avatar
 
Drives: 2013 Camaro 1LE 1SS
Join Date: Aug 2012
Location: Detroit
Posts: 850
Hey Nathan, can u please weigh one rear rotor and the rear caliper without pads? Please. Would love to see fronts too.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
Mgizzle is offline   Reply With Quote
Old 07-10-2013, 09:37 AM   #213
Rockin the BlueSS
The New Guy
 
Rockin the BlueSS's Avatar
 
Drives: 2010 2SS/RS IBM M6
Join Date: Sep 2009
Location: Cali
Posts: 1,148
Quote:
Originally Posted by vroomapunk View Post
Changing the pads without taking the calipers off is extremely bad ass.
the stock calipers work the same way FWIW

and Nathan, i am still checking your threads every day keep up the good work! everything looks awesome!
Rockin the BlueSS is offline   Reply With Quote
Old 07-10-2013, 09:51 AM   #214
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,280
Quote:
Originally Posted by Rockin the BlueSS View Post
the stock calipers work the same way FWIW

and Nathan, i am still checking your threads every day keep up the good work! everything looks awesome!
Yep, but if you have the roller skates (i.e. stock pads still installed) then you need to take the wheel off. As I don't believe the roller skates can clear the wheel.
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 07-10-2013, 10:19 AM   #215
Rockin the BlueSS
The New Guy
 
Rockin the BlueSS's Avatar
 
Drives: 2010 2SS/RS IBM M6
Join Date: Sep 2009
Location: Cali
Posts: 1,148
Quote:
Originally Posted by The Stig View Post
Yep, but if you have the roller skates (i.e. stock pads still installed) then you need to take the wheel off. As I don't believe the roller skates can clear the wheel.
ya that sucks... 2009 build date here didn't have to worry about that...
Rockin the BlueSS is offline   Reply With Quote
Old 07-10-2013, 10:21 AM   #216
Nutro


 
Nutro's Avatar
 
Drives: 2011 2SS Synergy Green
Join Date: Nov 2011
Location: Austin, Texas
Posts: 3,309
Quote:
Originally Posted by The Stig View Post
Yep, but if you have the roller skates (i.e. stock pads still installed) then you need to take the wheel off. As I don't believe the roller skates can clear the wheel.
Really? So I can just pop the wheels off and yank the roller skates and pads off and replace them without having to remove the calipers? I didn't know that.
__________________
2011 L99 W/ Kooks Long Tubes, Ported TB, Roto-Fab CAI, Apex Catch can, Stainless Works 3" ZL-1 Catback, Overdriven Maggie @10 Pounds boost putting down 501/535 on a conservative tune. Oh and Forgestar 20's
Nutro is offline   Reply With Quote
Old 07-10-2013, 10:29 AM   #217
2SSRS@Gen5diy

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 13,050
Quote:
Originally Posted by Nathan Moreno View Post
FYI, received some great news today parts that will be making their debut on G5.R at SEMA. I wish I could share it with you guys but it still top secret. I'm just hoping everything goes as planed.

Stay Tuned
I heard this a 100 times hope it for real this time.
2SSRS@Gen5diy is offline   Reply With Quote
Old 07-11-2013, 10:20 AM   #218
Rockin the BlueSS
The New Guy
 
Rockin the BlueSS's Avatar
 
Drives: 2010 2SS/RS IBM M6
Join Date: Sep 2009
Location: Cali
Posts: 1,148
[QUOTE=Nathan Moreno;6712573]
Quote:
Originally Posted by Nutro View Post
Really? So I can just pop the wheels off and yank the roller skates and pads off and replace them without having to remove the calipers? I didn't know that.
the stock SS calipers have a hole a lot like nathans caliper:

except the black piece is a much cheaper metal spring and the two screws are pins. Use a punch to remove the pins. use a wood clamp to compress the caliper and the pads slide right out the top.
Rockin the BlueSS is offline   Reply With Quote
Old 07-22-2013, 12:01 AM   #219
www.MorenoMotorsports.com
~ G5Carbon.com ~

 
www.MorenoMotorsports.com's Avatar
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 3,090
Quote:
Originally Posted by jeremywes View Post
those are bad a$$. Nice choice. Curious if you compared them in weight to the OEM rears.
Quote:
Originally Posted by The Stig View Post
+1

I'd be interested to see if they were able to keep them at OEM weight - ideally less, but going from 4 to 6 pot adds a bit of weight lol
Quote:
Originally Posted by Mgizzle View Post
Hey Nathan, can u please weigh one rear rotor and the rear caliper without pads? Please. Would love to see fronts too.
Guys I will just extremely busy at this stage but give me some time.

Quote:
Originally Posted by 2SSRS View Post
I heard this a 100 times hope it for real this time.
Offer I'm referring to some other stuff, not the intake........ call me and I will give you more details

Quick update:

Note: the arrow pointing to the hole were the rivet will go doesn't have anything to grab to.

Name:  1a.jpg
Views: 1643
Size:  105.3 KB

The concave channel is were the battery cable use to run through. If we left it like this, it would look unfinished. So the domino effect starts begin!!!

Name:  4.jpg
Views: 1653
Size:  95.0 KB

I figure we might as well cut the whole channel out and make it symmetrical like the other side.

Name:  5.jpg
Views: 1652
Size:  102.9 KB

Made a template.....

Name:  6.jpg
Views: 1645
Size:  111.6 KB

welded the new filler plate .....

Name:  7.jpg
Views: 1652
Size:  144.2 KB

Heck, why not get rid of the seam while we are at it

Name:  1.jpg
Views: 1636
Size:  90.5 KB

More welding

Name:  2.jpg
Views: 1641
Size:  128.2 KB

And skim coat. still need a little more work. Did I say I HATE body work!!!

Name:  3.jpg
Views: 1657
Size:  104.8 KB

What the hell, we might as well do all the spot welds while we at it.....

Name:  8.jpg
Views: 1652
Size:  112.4 KB

I though I had taken more progress picture of were we left off but I guess we got caught up in the moment. So stay tune for more.





.
__________________
<img src=http://www.camaro5.com/forums/image.php?type=sigpic&userid=32176&dateline=1430409495 border=0 alt= />
www.MorenoMotorsports.com is online now   Reply With Quote
Old 07-30-2013, 05:01 PM   #220
www.MorenoMotorsports.com
~ G5Carbon.com ~

 
www.MorenoMotorsports.com's Avatar
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 3,090




Update soon

Stay tuned...
__________________
<img src=http://www.camaro5.com/forums/image.php?type=sigpic&userid=32176&dateline=1430409495 border=0 alt= />
www.MorenoMotorsports.com is online now   Reply With Quote
Old 07-30-2013, 10:49 PM   #221
LC
ou mai gad
 
LC's Avatar
 
Drives: SW 2SS x2
Join Date: Feb 2010
Location: MX
Posts: 643
goodbye frame!
__________________
LC is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:08 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.