![]() |
|
|||||||
| Homepage | Garage | Wiki | Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics |
![]() |
|
|
Thread Tools |
|
|
#1 |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
A few ZL1 builds at Livernois Motorsports
2013 ZL1 Manual Trans
This car was baselined with less than 100 miles, but we were still puzzled as to why the numbers seemed low for a manual trans. We found that the dealership filled it with 87 octane fuel. When finished, we tuned it for 91 octane, because it was shipping to CA. Mods: Livernois Motorsports Exclusive Heat Exchanger Livernois Motorsports Solid Supercharger Coupler Livernois Motorsports Supercharger Pulley Livernois Motorsports Exclusive Steel Idler Relocation Bracket w/ Metco Pulleys Livernois Motorsports Spec’d Injectors Metco Oversize Crank Pulley Ring Innovators West Oversize Balancer Rotofab/Livernois Cold Air Intake NGK TR6 Plugs 160 Degree T-Stat Livernois Motorsports 91 Octane Dyno Tune ![]() ![]() ![]() ![]() ![]() ![]() Baseline numbers were 489 RWHP / 476 RWTQ - Post mod numbers were 581 RWHP / 579 RWTQ
__________________
|
|
|
|
|
|
#2 |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
2012 ZL1 Manual Trans
Mods: Livernois Motorsports Exclusive Heat Exchanger Livernois Motorsports Solid Supercharger Coupler Livernois Motorsports Supercharger Pulley Livernois Motorsports Exclusive Steel Idler Relocation Bracket w/ Metco Pulleys Livernois Motorsports Spec’d Injectors Stainless Works 1 7/8" Headers & Catted Mid-pipe Metco Oversize Crank Pulley Ring Innovators West Oversize Balancer Rotofab/Livernois Cold Air Intake NGK TR6 Plugs 160 Degree T-Stat Livernois Motorsports 93 Octane Dyno Tune ![]() ![]() ![]() ![]() ![]() ![]() ![]() Baseline numbers were 505 RWHP / 493 RWTQ - Post mod numbers were 632 RWHP / 633 RWTQ
__________________
|
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
2012 ZL1 Auto Trans
All paint work was done In-House and included: Aqua Blue Metallic Stripe - Hood, Roof, and Decklid Aqua Blue Metallic Rear Quarter Gills Aqua Blue Metallic Bowtie (Front & Rear) Argent Silver Upper and Lower Grilles & Fog Light Surrounds Powder Coated Wheels Gloss Black Upper Bumper Section (Under the Grille) ZL1 Emblems on Fenders The vehicle also has the following performance mods: Livernois Motorsports In-House CNC LSA Cylinder Heads Livernois Motorsports Stage 2C High Lift Camshaft Livernois Motorsports LSA Head Studs Livernois Motorsports Exclusive Heat Exchanger Livernois Motorsports Solid Supercharger Coupler Livernois Motorsports Supercharger Pulley Livernois Motorsports Exclusive Steel Idler Relocation Bracket w/ Metco Pulleys Livernois Motorsports Spec’d Injectors Livernois Motorsports Dual Fuel Pump Upgrade Metco Oversize Crank Pulley Ring Innovators West Oversize Balancer Rotofab/Livernois Cold Air Intake Stainless Works Longtube Headers & Mid-pipe Hardened Pushrods NGK TR6 Spark Plugs 160 Degree T-Stat GM 90mm Throttle Body Livernois Motorsports Dyno Tune ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Baseline numbers were 478 RWHP / 478 RWTQ - Post mod numbers were 707 RWHP / 680 RWTQ ![]() Thanks for looking! Regards, Rick LeBlanc Livernois Motorsports
__________________
|
|
|
|
|
|
#5 | |
![]() Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: St Michael, MN
Posts: 406
|
Quote:
|
|
|
|
|
|
|
#6 |
![]() Drives: Blown G8 GT Join Date: Apr 2010
Location: Orlando, FL
Posts: 651
|
Nice work
__________________
2008 G8 GT-Procharger D1-Livernois Stage 1C Cam-Kooks 1 7/8 Longtubes-Magnaflow Exhaust-Camaro SS Wheels and Brakes-Demon8 Designs Triple Gauge Pod( Dual Aeroforce and Wideband)- Dual Kicker CVX10-BMR Sway Bars, Trailing Arms, Toe Rods and Cradle Bushings
596/526 @9.5 lbs 11.6 at 123. 1.92 60ft |
|
|
|
|
|
#7 |
![]() ![]() Drives: VR ZL1 #259/Supercharged S2000 Join Date: Aug 2008
Location: Louisiana
Posts: 817
|
What wheels and tires are you running?
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '10 2SS/RS SW 6spd, Pace Car, & ZL1 Join Date: Jun 2009
Location: Woodhaven, Mich
Posts: 21,129
|
As always....
Very Nice!!!! ![]() What... should I do?
__________________
Don't forget, I honor ALL DISCOUNTS THAT APPLY!
BeckyD@RodgersChevrolet Woodhaven, Mi ..only 20 min from Detroit Metro Airport! 734-479-7117 ... BeckyD@RodgersChevrolet.com Available Camaro Inventory///Body Color XM Antenna My Summit White SS///My Pace Car |
|
|
|
|
|
#9 | |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
Quote:
Thanks! -Rick
__________________
|
|
|
|
|
|
|
#10 | |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
Quote:
The package on the grey car was nice if you don't want it to sound much different. It had 100% stock exhaust, but picked up good power even with 91 octane. With 93 it would pick up slightly more. 17" Bogarts with Hoosier Slicks and M&H Front Runners. -Rick
__________________
|
|
|
|
|
|
|
#11 |
![]() Drives: myself crazy Join Date: Apr 2008
Location: 808
Posts: 740
|
Man, that white Z with blue stripe is my favorite.
__________________
![]() ![]() |
|
|
|
|
|
#12 |
![]() Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 556
|
Awesome work!!!
|
|
|
|
|
|
#13 |
|
Banned
|
Great work sweet!
|
|
|
|
|
|
#14 |
![]() Drives: mustangs Join Date: Apr 2012
Location: va
Posts: 83
|
Like everything else that you guy's do they are all very impressive. On the yellow car that made 630,How much boost was it making ? I really hope that you guy's come out with a kit to put a Whipple on one of these cars. I would like to see what a stock car with just a Whipple at 16 pounds would make. 650?
|
|
|
|
|
|
#15 |
![]() Drives: Virtual ZL1 Join Date: Aug 2012
Location: Guam
Posts: 21
|
All very nice, but the white ZL1 is tops!
|
|
|
|
|
|
#16 |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
Thanks for the replies!
I was unsure how it would look with those colors, but really like the way it turned out! Rick
__________________
|
|
|
|
|
|
#17 |
![]() Drives: 2013 ZL1 CRT 6spd Join Date: Apr 2012
Location: Louisiana
Posts: 34
|
I want the ZL1 badges on the fenders added to my Car.
|
|
|
|
|
|
#18 |
![]() ![]() Drives: 2012 Blk ZL1 Join Date: Dec 2011
Location: Baton Rouge, LA
Posts: 805
|
|
|
|
|
|
|
#19 |
|
R.I.P. jesserayjames
|
I love all of them
__________________
Jannetty Racing JRE Street Package
|
|
|
|
|
|
#20 |
|
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 433
|
ever want to sell your shop car?...seriously....signed waiting for a allocation......sigh
|
|
|
|
|
|
#21 |
|
Est.1775
Drives: ZL1 #206 Join Date: Sep 2009
Location: Northern VA
Posts: 4,413
|
|
|
|
|
|
|
#22 |
|
Team Chevrolet
Drives: 2007 Z06 and 2011 Camaro 2SS Join Date: Jan 2011
Location: San Antonio
Posts: 400
|
Yes Sir! I bet it sound wicked too...
__________________
Forgeline GA3's 9.5/11 with NT-05 Nitto's, Pedders Sportsryder Supercar Coilovers, MGW Shifter, LPE GT1-1 Cam, AR 1 7/8" LT's, Halltech CAI, SW Retro Chambered Cat-Back, Installed and tuned by Corey @ Henderson Performance Technology.
|
|
|
|
|
|
#23 | |
![]() ![]() ![]() Drives: 2010 Camaro Join Date: Jun 2009
Location: Dearborn Heights, MI
Posts: 763
|
Quote:
Correct -Rick
__________________
|
|
|
|
|
|
|
#24 |
|
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 433
|
http://www.youtube.com/watch?feature...&v=fx-Rxh2BlPs
For those of you who can appreciate why I want these guys to do thier work on my zl1 |
|
|
|
|
|
#25 |
![]() Drives: ZL1 #1691 Black on black. Join Date: Jun 2012
Location: WNY
Posts: 533
|
What would the crankshaft HP be? Great to see the hp that these engines can take.
|
|
|
|
![]() |
| Thread Tools | |
|
|