[COTW 10/25/10]: Roxy - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

boostedyards86 · 07-30-2009, 12:18 AM

list or parts for the first round of mods:
skip shift eliminator - i like rowing thru the gears myself...$29.95

160* Tstat - anyone feel like helping me get the fueling corrected once i drop this in??...$29.95 (pretty good with hptuners, but this is my first time playing with a thermostat.)

aem wideband - i like em some dont... $220

fastlane inc. or bwoody performance CAI... $$ will wait and see. both are pricey for an intake and both require relocation of stock windshield washer fluid resevoir.

boostedyards86 · 08-06-2009, 05:25 PM

stock dyno 900miles on the odometer.

average of three runs
360whp and 363wtq. this is a dynojet dyno.

third1 · 08-07-2009, 09:22 AM

Good numbers

boostedyards86 · 08-07-2009, 03:04 PM

thanks man. i was happy. seems to be right around the norm.

boostedyards86 · 08-23-2009, 11:48 AM

intake from fastlane inc. and a retune via hptuners

boostedyards86 · 08-23-2009, 11:49 AM

i feel there is still more in her but i got my exhaust in and had to install it asap. expect results from ARH lt's and slp lm1 next week. gives me a few days to work on a good toon.

boostedyards86 · 08-23-2009, 12:32 PM

custom gauge placement

dyno run with intake

idle and rev with slp lm1 sounds abit off in the garage.

first time down the track

boostedyards86 · 09-10-2009, 04:59 PM

dyno with ARH, SLP lm1 and intake

12.74 at 111mph stock tires.

playing with a shelby gt500

chevy on chevy, caught traction just a split second before he did.

boostedyards86 · 09-10-2009, 05:06 PM

SLP supercharger kit will be here in a day or so. excitement is growing. need to buy stock in tires very soon lol.

jerseymike68 · 09-11-2009, 12:25 AM

Nice information here

zebra · 09-11-2009, 12:28 AM

looks great. that s/c will definitely get your numbers up. just make sure to get some drag radials to keep a decent 60'

boostedyards86 · 09-11-2009, 12:41 AM

ya prob gonna go once with stock tires just for shits and giggles. but not expecting anything special et wise.

boostedyards86 · 09-15-2009, 07:49 PM

supercharger is installed. not to hard to do, just waiting to get the base toon or info on injector sizes to make my own toon. hoping to be able to hit up the track tomorrow night.

boostedyards86 · 09-20-2009, 10:02 PM

supercharger is on. first night at the track on the stock 6psi went 12.00 at 119.33.

dyno sheet of setup. Mods were TVS2300 slp kit, arh long tubes, slp lm1, fastland cai, 160* tstat.

boostedyards86 · 04-21-2010, 10:49 AM

Ok updating everyone on the car. Parts currently on are as follows SLP TVS2300, 3.6" pulley, Texas Speed blower cam, BMR trailing arms, Fastlane Inc CAI, 160* tstat, slp loudmouth 1, ARH longtubes, aem wideband, aem boost gauge, 17" bogart racing rims, Mickey Thompson drag radials,AEM Meth injection, spec twin disc clutch, boostedyards toond. With this combo it put down 588whp and 566wtq on a local mustang dyno. It also propelled the car to an 11.3 at 125 on the stock and slipping/burning clutch on a 38* day with zero track prep (it was a motorcycle only day and I had permission to run).

vid of said run.

boostedyards86 · 04-21-2010, 10:53 AM

This was all in preparation of the Imports vs Domestics at MIR back in November. However we had a slight problem.

Video says it all. The output shaft twisted right off of the transmission. I have been waiting on a beefier trans just like many other shops. One is coming some day via RPM trans with parts being built by Driveshaft shop. I'm unsure when this will be done and have been waiting since November like i said. But regardless it will come sooner or later. In the meantime we are looking at many parts to strengthen the drivetrain. Some parts aren't set in stone yet so I will only say once they are ordered.

boostedyards86 · 04-21-2010, 10:55 AM

boostedyards86 · 04-21-2010, 10:57 AM

Pictures of the output shaft will be uploaded once i find where i put them.

boostedyards86 · 04-21-2010, 11:00 AM

Ordered yesterday:
-TSP cnc 280cc heads, Ti retainers, Hollow stem valves, .675 springs
-oem head gaskets, arp head studs
-arp rod bolts
-85# injectors from Injection Connection. Thanks again for the help guys.
-Vengeance Racing Surge tank dual bosch pump setup Return style system. Built for G8's should work for camaros.

BackinBlackSS/RS · 04-21-2010, 11:00 AM

That thing is a BEAST!!!!!!!!!!!!!!

boostedyards86 · 04-21-2010, 11:04 AM

Parts on the potential buy list:
-Innovators West 8rib system 10% overdrive
-Cog drive rear pulley and belt system
-Driveshaft, axles, diff.

boostedyards86 · 04-21-2010, 11:05 AM

Thank you.

SK360 · 04-21-2010, 12:24 PM

What a piece... We pushed this thing to a faster ET then it could manage at MIR...

2010 SSRS · 04-21-2010, 01:07 PM

That Camaro looks awesome

boostedyards86 · 04-21-2010, 01:24 PM

Thanks man I really feel the stripes bring life to the rjt color. And matt shush. Clearly I pushed a lil too hard.

07-30-2009, 12:18 AM	#1
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	[COTW 10/25/10]: Roxy list or parts for the first round of mods: skip shift eliminator - i like rowing thru the gears myself...$29.95 160* Tstat - anyone feel like helping me get the fueling corrected once i drop this in??...$29.95 (pretty good with hptuners, but this is my first time playing with a thermostat.) aem wideband - i like em some dont... $220 fastlane inc. or bwoody performance CAI... $$ will wait and see. both are pricey for an intake and both require relocation of stock windshield washer fluid resevoir.

08-07-2009, 09:22 AM	#3
third1 speed freak Drives: 2012 Cadillac Escalade,10 IOM 2ss Join Date: Jun 2009 Location: Neenah Wi Posts: 1,137 View My Garage	Good numbers __________________ Current:2012 Cadilac Escalade.2011 CVO StreetGlide cammed,tuned&loud. 2010 IMO/IO,custom stripes,GFX,sunrf,solo exhaust,JBA shorties,rotofab,Jannetty tune,Pfadt,JLw6 Audison&Hertz,7/4/09 2GIFKIEJ6A9123779Del 7/10/09 Former Camaros 72 LT1 Z28, 86 z28

08-23-2009, 11:48 AM	#5
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	intake from fastlane inc. and a retune via hptuners __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

08-23-2009, 11:49 AM	#6
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	i feel there is still more in her but i got my exhaust in and had to install it asap. expect results from ARH lt's and slp lm1 next week. gives me a few days to work on a good toon. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

09-10-2009, 05:06 PM	#9
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	SLP supercharger kit will be here in a day or so. excitement is growing. need to buy stock in tires very soon lol. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

08-06-2009, 05:25 PM	#2
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	stock dyno 900miles on the odometer. average of three runs 360whp and 363wtq. this is a dynojet dyno.

08-07-2009, 03:04 PM	#4
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	thanks man. i was happy. seems to be right around the norm.

09-11-2009, 12:25 AM	#10
jerseymike68 Account Suspended Drives: black Join Date: Aug 2009 Location: Riverside Posts: 88	Nice information here

09-11-2009, 12:28 AM	#11
zebra just can't seem to leave Drives: your mom wild!! Join Date: Oct 2008 Location: cold & windy Posts: 11,305 View My Garage	looks great. that s/c will definitely get your numbers up. just make sure to get some drag radials to keep a decent 60' __________________

09-11-2009, 12:41 AM	#12
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	ya prob gonna go once with stock tires just for shits and giggles. but not expecting anything special et wise. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

09-15-2009, 07:49 PM	#13
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	supercharger is installed. not to hard to do, just waiting to get the base toon or info on injector sizes to make my own toon. hoping to be able to hit up the track tomorrow night. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

09-20-2009, 10:02 PM	#14
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	supercharger is on. first night at the track on the stock 6psi went 12.00 at 119.33. dyno sheet of setup. Mods were TVS2300 slp kit, arh long tubes, slp lm1, fastland cai, 160* tstat. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe Last edited by boostedyards86; 04-23-2010 at 12:56 AM.

04-21-2010, 10:49 AM	#15
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	Ok updating everyone on the car. Parts currently on are as follows SLP TVS2300, 3.6" pulley, Texas Speed blower cam, BMR trailing arms, Fastlane Inc CAI, 160* tstat, slp loudmouth 1, ARH longtubes, aem wideband, aem boost gauge, 17" bogart racing rims, Mickey Thompson drag radials,AEM Meth injection, spec twin disc clutch, boostedyards toond. With this combo it put down 588whp and 566wtq on a local mustang dyno. It also propelled the car to an 11.3 at 125 on the stock and slipping/burning clutch on a 38* day with zero track prep (it was a motorcycle only day and I had permission to run). vid of said run. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 10:53 AM	#16
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	This was all in preparation of the Imports vs Domestics at MIR back in November. However we had a slight problem. Video says it all. The output shaft twisted right off of the transmission. I have been waiting on a beefier trans just like many other shops. One is coming some day via RPM trans with parts being built by Driveshaft shop. I'm unsure when this will be done and have been waiting since November like i said. But regardless it will come sooner or later. In the meantime we are looking at many parts to strengthen the drivetrain. Some parts aren't set in stone yet so I will only say once they are ordered. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 10:55 AM	#17
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	__________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 10:57 AM	#18
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	Pictures of the output shaft will be uploaded once i find where i put them. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 11:00 AM	#19
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	Ordered yesterday: -TSP cnc 280cc heads, Ti retainers, Hollow stem valves, .675 springs -oem head gaskets, arp head studs -arp rod bolts -85# injectors from Injection Connection. Thanks again for the help guys. -Vengeance Racing Surge tank dual bosch pump setup Return style system. Built for G8's should work for camaros. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 11:00 AM	#20
BackinBlackSS/RS Go Blue!!!!! Drives: 2012 Cruze LT Join Date: Mar 2009 Location: Indiana Posts: 23,374	That thing is a BEAST!!!!!!!!!!!!!!

04-21-2010, 11:04 AM	#21
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	Parts on the potential buy list: -Innovators West 8rib system 10% overdrive -Cog drive rear pulley and belt system -Driveshaft, axles, diff. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 11:05 AM	#22
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	Thank you. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

04-21-2010, 12:24 PM	#23
SK360 Account Suspended Drives: 2005 Pontiac GTO Join Date: Jun 2009 Location: Pittsburgh, PA Posts: 593	What a piece... We pushed this thing to a faster ET then it could manage at MIR...

04-21-2010, 01:07 PM	#24
2010 SSRS R.I.P. jesserayjames Drives: 2010 IOM 2SSRS Join Date: May 2009 Location: Warwick,RI Posts: 112,029 View My Garage	That Camaro looks awesome __________________ Jannetty Racing JRE Street Package

04-21-2010, 01:24 PM	#25
boostedyards86 Drives: Cummins 3500 Join Date: Jul 2009 Location: Pgh PA Posts: 605 View My Garage	Thanks man I really feel the stripes bring life to the rjt color. And matt shush. Clearly I pushed a lil too hard. __________________ 2010 Camaro SS-758rwhp, 664rwtq STOCK BOTTOM END!!! 10.52@134mph 1.63 sixty foot.... 93OCTANE! 06 Cummins- 466whp 940wtq EFI LIVe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[COTW: 5/10/10] Bolt-ons done - GFX, Heritage, TT2 wheels, SLP spoiler, SS emblems	MR. FBDY	Camaro Photos \| Spyshots \| Video \| Media Gallery	54	05-01-2013 01:01 PM
[COTW 5/24/10]: 2010 Camaro meets Germany...	Luttinger	Camaro Photos \| Spyshots \| Video \| Media Gallery	144	02-05-2013 10:51 AM
[COTW 4/20/10] 570hp-lpe's 2010 2SS/RS RJT 6SP	600hp-lpe	Member Car Journals	119	05-09-2012 06:29 PM
[COTW 6/28/10]: Meet the "REAPER SS"	billyspeed	Camaro Photos \| Spyshots \| Video \| Media Gallery	89	12-24-2011 11:40 AM
[COTW 6/7/10]: "HOT ROD ALLEY" MOD'S What do you think	racer778	Camaro Photos \| Spyshots \| Video \| Media Gallery	99	06-11-2011 09:28 AM